I just got a 3-piece Super A drawbar and need some dimensions to put it together. The drawbar is made up of the main U-shaped part and a bracket at each side. The bracket should have a pin welded in place for the forward attachment of the main part. The ones I just got have a hole where the pin belongs. I can measure the holes, but don't know if I would be measuring something close to the original holes or the result of a bunch of wear.
Came somebody get me the length and diameter of an original pin?
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Drawbar Dimension
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Team Cub
- Posts: 17272
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
-
- 10+ Years
- Posts: 14
- Joined: Thu Feb 06, 2003 12:53 pm
- Zip Code: 03884
- Tractors Owned: 49 Cub
50 Cub
49 Super A
52 H - Circle of Safety: Y
- Location: New Hampshire
Re: Drawbar Dimension
I came up with 7/8" X 1 1/2" (hard to measure on the tractor). See if others agree.
Phil
Phil
- Don McCombs
- Team Cub Mentor
- Posts: 17477
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Drawbar Dimension
I think I have one off the tractor. If I can get into the farm this afternoon, I'll check it out.
- Don McCombs
- Team Cub Mentor
- Posts: 17477
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Drawbar Dimension
7/8" X 2"
-
- 10+ Years
- Posts: 14
- Joined: Thu Feb 06, 2003 12:53 pm
- Zip Code: 03884
- Tractors Owned: 49 Cub
50 Cub
49 Super A
52 H - Circle of Safety: Y
- Location: New Hampshire
Re: Drawbar Dimension
I agree with 2". I didn't include the thickness of the bracket.
Phil
Phil
-
- Team Cub
- Posts: 17272
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Drawbar Dimension
Thanks guys. That is exactly the information I was looking for. 7/8 was my best guess on diameter and you confirmed it. I will see if I can find some 2 inches long. Fastenal's PDF drawing of that type pin has a table of different sizes that includes 7/8 x 2 but the shortest actual part they list is 2-1/2 long. I will probably end up using 7/8 x the shortest I can find.
- Don McCombs
- Team Cub Mentor
- Posts: 17477
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Drawbar Dimension
Jim, the pin is welded into the Super A bracket the same way as the Cub bracket. I should have measured how far the pin protrudes from the bracket. I'll try to get that tomorrow.
Photo courtesy TM Tractor Parts
Photo courtesy TM Tractor Parts
- Don McCombs
- Team Cub Mentor
- Posts: 17477
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Drawbar Dimension
1 3/8" protruding, Jim.
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 7 guests