Farmall Super A, AV, 1939 - 1954
Thu Mar 16, 2006 2:43 pm
When I pull the starter rod on the Super A, the starter kicks in and makes a heck of a racket. It sounds like an OOOGAAH horn.
I think the engine is spinning because the front fan is turning, but it makes a heck of a clatter. New starters for these things are pretty expensive! Over $200 by the look of things. Once I get if off of there what should I do, inspect the starter gear and the flywheel for wear or missing teeth, and if they look OK have a go at the inside of the starter?
I have to pull the lever really hard, too, so I'm assuming I need a new switch. Also, the tractor just up and dies at random times - I think it has a short somewhere in the wiring. I ordered a new service manual for all the Farmalls, so I'm hoping that will tell me more about rewiring it!
Thu Mar 16, 2006 4:41 pm
Hey Allen...sounds like you should take the starter off and look at the gears (they're probably worn down or missing some).
At any rate...Find a good, local electrical shop that rebuilds starters, and have yours rebuilt (it's a lot cheaper than a NEW one...OUCH!
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.