Farmall Super A, AV, 1939 - 1954
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Mon May 22, 2006 2:38 pm
Finally got around to finishing up the 3-pt. hitch on the Super A. Built it mostly from parts I got from Redland Hill on eBay and from the local Tractor Supply Company, with a bunch of fabrication required for the top link mount point. I think it came out ok! Next up, the AC generator mount for the Cub - the driveshaft is complete and the pulleys are mounted, now I just need to figure out where to put it.
Mon May 22, 2006 7:07 pm
that looks great
Mon May 22, 2006 7:46 pm
Now, I just need a 3-point *implement*!
Tue May 23, 2006 12:07 am
Looks good Allen. But you need a sway bar to keep it from moving left and right.
Tue May 23, 2006 7:30 am
Looks good Allen - Like Merlin said, add a sway bar or some chains. You don't want those pretty straight arms wrapping around a tire.
Tue May 23, 2006 6:42 pm
Oops, I forgot to show the chains. It's hard to see them, but in the center of each lower arm is a big "U" hook already installed, and I'm making the tabs to put the chains into on the final drives.
Tue May 30, 2006 10:15 am
Hmmm, one question.
A lot of the kits come with a beefy bar at the top that's U-bolted to the stock swaybar tube... I didn't bother to do that, do I need to worry about that tube getting bent?
Tue May 30, 2006 7:15 pm
personally I think you will be fine, unless you plan on really really yanking on somthing... that's just me tho
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.