A PTO oil seal
Moderator: Team Cub
4 posts
• Page 1 of 1
A PTO oil seal
by jlcross81 » Sun Mar 25, 2007 8:31 pm
My pto oil seal was leaking oil so I deceded to replace it. I had to take it out in pieces, but I think there might have been 2 seals (one turned in facing the front of the tractor, and one facing the back of the tractor.) I looked in the manual I have and I only see one. Is this a special seal?? Does anyone know the part number so I can get another one?? THanks
Of all the things I have lost I miss my mind the most!!
- jlcross81
- Cub Star
- Posts: 96
- Joined: Fri Feb 25, 2005 5:38 pm
- Location: oklahoma
by Don McCombs » Sun Mar 25, 2007 10:00 pm
The NAPA number is 11223. Made in USA by CR.
Don McCombs
MD, Deep Creek Lake
"1950 Something" Farmall Cub, Cub-193 Moldboard Plow
1977 IH Cub w/FH, L-F194 Moldboard Plow, L-38 Disk, L-F1 Platform Carrier, Mott FHC Mower
1948 Farmall Super A, IH 22 Mower
1951 Farmall Super C w/FH
MD, Deep Creek Lake
"1950 Something" Farmall Cub, Cub-193 Moldboard Plow
1977 IH Cub w/FH, L-F194 Moldboard Plow, L-38 Disk, L-F1 Platform Carrier, Mott FHC Mower
1948 Farmall Super A, IH 22 Mower
1951 Farmall Super C w/FH
-
Don McCombs - Cub Pro
- Posts: 9520
- Joined: Mon Feb 03, 2003 6:45 am
- Location: MD, Deep Creek Lake
- Zip Code: 21550
- Tractors Owned: .
"1950 Something" Farmall Cub
1977 IH Cub w/FH
1948 Farmall Super A
1951 Farmall Super C w/FH 
- Circle of Safety: Y
by barn_cub » Mon Mar 26, 2007 8:01 pm
JL,
I recently had to do a 'quickfix' on my SA pto seal. Like you, I dug and dug and dug to get the old double leather seal out without taking down the tranny. I never did get all the seal body out, but I did get enough out to insert a modern thin oil seal into the cleaned-out space. The thin oil seal costs less than $7.00. I will replace the seal later with the good one--NAPA's costs around $50. So far, the 'quickfix' fixed the leak.
Barn_cub
I recently had to do a 'quickfix' on my SA pto seal. Like you, I dug and dug and dug to get the old double leather seal out without taking down the tranny. I never did get all the seal body out, but I did get enough out to insert a modern thin oil seal into the cleaned-out space. The thin oil seal costs less than $7.00. I will replace the seal later with the good one--NAPA's costs around $50. So far, the 'quickfix' fixed the leak.
Barn_cub
Cub herd, 2 Farmall A's, 2 AC's, 1 Ford, 1 JD
- barn_cub
- Cub Star
- Posts: 118
- Joined: Fri Feb 16, 2007 10:17 am
- Location: South Alabama, US
by jlcross81 » Mon Mar 26, 2007 8:53 pm
I got it all cleaned out and was able to order a new seal from he international house for $19.39. Can't wait to get it all back together its time to mow!!
Of all the things I have lost I miss my mind the most!!
- jlcross81
- Cub Star
- Posts: 96
- Joined: Fri Feb 25, 2005 5:38 pm
- Location: oklahoma
4 posts
• Page 1 of 1
Return to Farmall A, Super A, AV
Who is online
Users browsing this forum: No registered users and 3 guests
|
|