Page 1 of 1
"A" exhaust lift .
Posted: Thu May 24, 2007 8:50 pm
by Mach-z
A friend of mine just got a 1941 "A" and we picked up a exhaust lift system . We need some info ,picks and a place for parts for the lift.
He wants to use it to help lift a snowplow this next winter . Any thoughts on this topic would help . We thought it would be neat to get it working seeing as how you never see a working system .
Posted: Thu May 24, 2007 8:58 pm
by John *.?-!.* cub owner
Your best bet for parts will be one of the tractor shows, such as RPRU.
I do have a manual scanned I can email you if you like. 12 pages
Posted: Fri May 25, 2007 4:17 pm
by Mach-z
That would be great , thank you .
http://www.jrracing@wowway.com
Posted: Fri May 25, 2007 5:30 pm
by KETCHAM
Where you live at???Kevin
Posted: Fri May 25, 2007 9:07 pm
by John *.?-!.* cub owner
2 emails sent
Posted: Sat May 26, 2007 12:14 pm
by Mach-z
[quo
te="KETCHAM"]Where you live at???Kevin[/quote]
North of Detolit Michigan ...
Posted: Thu May 31, 2007 2:04 pm
by Phillip W. Lenke
I have a working exahst lift on our 45 BN Except the levers and the uderbelly lift bar.
How much of it do you have. I took some pictures of one on a A for reference.
Here is a picture of what I have.
There is a gasket on the bottom of th cylinder . I would replace the leather seal inside it was pricey $90 bucks. However it wont work right ,hold the lift without a good one. I though mine was OK but drifted down. New seat holds well..
Before main exhaust valve
After Ceramic coated
Here is the tractor with the lift parts that I have on.
Pretty well versed now after going through, making and repairing some parts and talking to several members on this subjct
Here to help you
Phil
exhaust lift
Posted: Sun Jun 03, 2007 7:35 pm
by Mach-z
I came accross a hole complete system for the back of a "A" but it needs all new seals and leather bladder. I'm told there is a gentlemen named Gean or something on Yesterdays tractor that reproduces the bladder for $30.00 .
I bought the system for a friend who is in the process of restoring a 1941 "A" and we thought it would be neat to get it working seeing as how you never see them. If you have anyother info or input on these we sure could use it and yours looks great very nice .
Email me direct if you want .
http://www.jrracing@wowway.com
Thank You
James Rumph
Re: "A" exhaust lift .
Posted: Tue Feb 17, 2009 7:15 pm
by ecc12
Hi
I was woundering if any one might have a manual for the exhaust lift system
Thank You
you can send it to
ecc122870@yahoo.com
Re: "A" exhaust lift .
Posted: Tue Feb 17, 2009 7:41 pm
by RaymondDurban
ecc12 wrote:Hi
I was woundering if any one might have a manual for the exhaust lift system
Thank You
you can send it to
ecc122870@yahoo.com
Parts manual available on Rudi's server. TC-26E Parts Catalog pages 143-149
http://www.cleancomputes.com/Cub/A%20-% ... index.htmlHope this helps, Good Luck.
Re: "A" exhaust lift .
Posted: Tue Feb 17, 2009 9:26 pm
by t jackson
i think jim becker wrote an article about the lift awhile back in red power it explains all about it with pictures
Re: "A" exhaust lift .
Posted: Tue Feb 17, 2009 10:55 pm
by John *.?-!.* cub owner
Re: "A" exhaust lift .
Posted: Wed Feb 18, 2009 6:52 pm
by t jackson
that is a great looking exhaust lift you have there ps tractor looks great too
Re: "A" exhaust lift .
Posted: Thu Feb 19, 2009 9:15 pm
by knucklebuster
those old exhaust lifts are as interesting as can be aren't they?
Re: "A" exhaust lift .
Posted: Thu Feb 19, 2009 9:16 pm
by Joey
If I remember right, my brother in law has an A with a working exhaust lift system. I'll contact him to find out and if he does, I'll try to get him to reply to this post. He seemed pretty knowledgeable about it because he explained it all to me how it works - did I remember? No. All I remember is that he said it uses the exhaust gas to power the lift.