Farmall Super A, AV, 1939 - 1954
Moderator: Team Cub
by Joey » Sun Jun 24, 2007 9:21 pm
Made a deal on a Super AV today - tractor hasn't run in years, but motor is loose. Sheet metal looks straight but rusty. Carburetor and distributor ignition was off but found in shed. Will take some cleaning and painting to make it look good. My question is, the starter was missing (used for another tractor) - does a starter from the Cub fit the Super AV? How interchangeable are parts?
-
Joey
- 501 Club

-
- Posts: 727
- Joined: Sun Mar 14, 2004 10:00 pm
- Location: LA, Hammond
by Merlin » Mon Jun 25, 2007 2:36 am
Joey, about the only thing I can think of that is interchangeable between the Cub and the Super AV is the oil and water. I think they have the same tune up components though. The starter isn't one of them.
-

Merlin
- CubPro Emeritus
-
- Posts: 940
- Joined: Mon Feb 03, 2003 8:06 am
- Location: Ponchatoula, La.
- eBay ID: merlin582
by Joey » Mon Jun 25, 2007 11:42 am
Thanks, Merlin, someone else also confirmed that the starter was different between the Cub and the A's and AV's.
-
Joey
- 501 Club

-
- Posts: 727
- Joined: Sun Mar 14, 2004 10:00 pm
- Location: LA, Hammond
by Brandon Webb » Mon Jun 25, 2007 2:55 pm
Are the front rims good? If so they'll bring a war price by themselves. If they're bad you can buy ford 8n wheel blanks and weld the traingular centers into them. Brandon. 
1947 Farmall Cub Serial #1024 1957 Farmall Cub High Crop 1975 International Cub Several Cub Cadet Originals IH Cast Bear and Cadet Statues
-

Brandon Webb
- 501 Club

-
- Posts: 2092
- Joined: Tue Sep 20, 2005 4:32 pm
- Location: London Kentucky
- Zip Code: 40741
by Joey » Mon Jun 25, 2007 3:46 pm
Didn't know that! Everything looked pretty good about the tractor, however I didn't give it the really close inspection. Sheet metal and rims all looked good, including seat and steering wheel. Thanks for the tip about the front wheel.
-
Joey
- 501 Club

-
- Posts: 727
- Joined: Sun Mar 14, 2004 10:00 pm
- Location: LA, Hammond
by parts man » Mon Jun 25, 2007 7:50 pm
Super A, C, or super C starter will interchange, an pre-super A starter is the same other than the switch.
V.P. of T.S.A. (taking stuff apart)
-

parts man
- 501 Club

-
- Posts: 619
- Joined: Wed Jul 30, 2003 9:41 pm
- Location: Sussex N.B. Can.
-
by deputy jailer » Tue Jun 26, 2007 2:54 am
parts man wrote:Super A, C, or super C starter will interchange, an pre-super A starter is the same other than the switch.
parts man is 100% correct. The cubs have the 2 bolt flange and they are smaller and the A's on up have the 3 bolt flange and different types of switches. You should be able to find one fairly easy if you can't, let me know I may have one or two lying around the shop or can order one. All in all though you should be able to find one fairly easy.
podge
-
deputy jailer
-
by Merlin » Tue Jun 26, 2007 5:35 am
deputyjailer90 aka podge wrote:parts man wrote:Super A, C, or super C starter will interchange, an pre-super A starter is the same other than the switch.
parts man is 100% correct. The cubs have the 2 bolt flange and they are smaller and the A's on up have the 3 bolt flange and different types of switches. You should be able to find one fairly easy if you can't, let me know I may have one or two lying around the shop or can order one. All in all though you should be able to find one fairly easy. podge
The Super A has a 2 bolt flange, but it still won't fit the Cub.
-

Merlin
- CubPro Emeritus
-
- Posts: 940
- Joined: Mon Feb 03, 2003 8:06 am
- Location: Ponchatoula, La.
- eBay ID: merlin582
by deputy jailer » Tue Jun 26, 2007 5:58 am
Merlin
I guess I had a small brain fart. Thats 3rd shift for ya. Yep 2 bolt, sorry for any confusion.
-
deputy jailer
-
Return to Farmall A, Super A, AV
Who is online
Users browsing this forum: No registered users and 1 guest
|
|