Sun Feb 17, 2008 1:24 pm
Ok I cant figure out where to fill the oil after I have changed it. I always drain all the oils to check make sure they have clean oil in them but for the life of me I cant find the fill on my 1940 A. Please help. Thanks
Sun Feb 17, 2008 1:31 pm
In the vent on top of the rocker cover. It sticks up through the center of the hood.
Sun Feb 17, 2008 6:49 pm
Just do not put it in the top of the air breather like I did once
One too many pops...
Mon Feb 18, 2008 1:00 pm
Really- From the top of the engine???
I was wondering about that pipe. The topper for it doesn't really stick on there. How much? I'm a dipstick and cant find one!!!
Mon Feb 18, 2008 1:58 pm
I don't know the amount, but should be 4 1/2 quarts approximately. check the level by opening the petcocks on the side of the crankcase pan. Oil should run out the bottom one (minimum level). Top one is maximum level.
Mon Feb 18, 2008 7:44 pm
John's right, manual says approx 5 quarts...
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.