carb kit needed

Sat Jun 14, 2008 1:28 pm

I need to rebuild carb on my Super A. It has B21 cast in body of carb. It is a Zenith carb. Where might I find proper kit for this old carb? Thanks Randy Bryan

Re: carb kit needed

Sat Jun 14, 2008 2:28 pm

Randy,

Try here:

http://www.thecarburetorstore.com/

or here:

http://www.farmersservice.com/newzenith.htm

You may have to call them to get the correct kit. Let us know how you make out.
Last edited by Don McCombs on Sat Jun 14, 2008 3:33 pm, edited 2 times in total.

Re: carb kit needed

Sat Jun 14, 2008 2:32 pm

Randy - call Ken Updike at Carter & Gruenewald. Their number is listed on their website @ http://www.cngco.com

Re: carb kit needed

Sun Jun 15, 2008 2:14 pm

While the genuine IH kit is the only way to go on a Cub carb, I was disappointed with the IH kit for a Zenith on a 100. I would go to NAPA, I used their kit on my Super A an it worked well. It does not include the throttle shaft, so if you need that, it will have to came from Case/IH. You need the number off the round brass tag on the top of the carburetor to be sure you get the correct kit. I believe the NAPA number is CRB 21565 for most IH Zenith carbs used on the Super A.

Image

Re: carb kit needed

Sun Jun 15, 2008 2:58 pm

Thanks, I will try NAPA since it is one close to home. Randy