hey evryone,
im in the middle of working on my farmall A and i have to pull the head off because my 3rd cylinder intake valve is stuck and im going too pull the head off and i was wondering what the torq specs are for the head bolts and rocker covers
thanks,
kyle.m
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
torq specs
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
kyle mcgee
- 10+ Years
- Posts: 7
- Joined: Mon Nov 27, 2006 12:21 pm
- Location: grand valley ontario
- Contact:
-
Daniel H.
- 10+ Years
- Posts: 613
- Joined: Mon Feb 03, 2003 1:18 pm
- Zip Code: 27055
- Tractors Owned: 1951 Super A
1955 Cub Lo-boy
1955 Ferguson TO-35 - Circle of Safety: Y
- Location: NC, Yadkinville
Re: torq specs
65 foot-pounds on the head studs. Tighten them again after running it long enough to get it hot. Be sure to alternate from side to side. Tighten the valve cover until it is snug and tighten it evenly, don't want to bend it. You can always snug it a little more if it wants to leak.
The four most expensive words in tractor restoration: "We might as well..."
-
kyle mcgee
- 10+ Years
- Posts: 7
- Joined: Mon Nov 27, 2006 12:21 pm
- Location: grand valley ontario
- Contact:
Re: torq specs
thanks for the help much appreciated 
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 22 guests
