This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
hydraulic problem
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 158
- Joined: Sat Aug 26, 2006 9:01 pm
- Zip Code: 51638
- Tractors Owned: 48 cub
46 farmall M
45 farmall B
55 farmall 300
129 cub cadet
3208 cub cadet
22 sickle mower
170 cub planter
152 disc plow
2 molboard plows
cub middle buster - Location: Essex IA
- Contact:
hydraulic problem
i just got a super a im losing the oil out of lifting unit. found the hydro oil in my engine oil pan i then replaced the seal on the pump gear no change still leaking into engine. any ideas
-
- 10+ Years
- Posts: 173
- Joined: Fri Nov 16, 2007 4:14 pm
- Zip Code: 51646
- Location: New Market, Iowa
- Contact:
Re: hydraulic problem
Possibly the shaft is worn to the point that a new seal is no longer effective. I've basically had no first hand experience with those pumps, but is it possible to install 2 seals instead of just one?
I see you are from Essex, Iowa. I am from New Market. Maybe we know each other?
I see you are from Essex, Iowa. I am from New Market. Maybe we know each other?
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 16 guests