60" IH Leveling and Grader Blade Plate

Wed Mar 17, 2010 8:22 am

Does anyone have the dimensions of the following:
PLATE, pivot axle brace mounting, Part # 650307R3
for a 60" IH Leveling and Grader Blade Plate?

http://www1.caseih.com/northamerica/PartsService/Pages/search.aspx
Click on:
Begin your search for the parts you need right here.
Type in the two words for the pasword.
Type in: 60 International Harvester Leveling & Grader Blade
Click on: Figure Listing
Click on: G-4 MOUNTING FRAME AND LIFTING LEVER - 60 LEVELING AND GRADER BLADE
It's item #2 on the 60 INTERNATIONAL HAR / G-4 MOUNTING FRAME AND LIFTING LEVER - 60 LEVELING AND GRADER BLADE
I need to make one for my blade.
Thanks in advance. :D
Mark

Re: 60" IH Leveling and Grader Blade Plate

Wed Mar 17, 2010 1:51 pm

Mark:

You might want to ask WisconsinCubman - Mike. He has a 1A-60 Blade which probably is the right model. Here is the : McCormick 1A-60 Leveling and Grader. It is a pdf file so just right click and save target as.

Re: 60" IH Leveling and Grader Blade Plate

Thu Mar 25, 2010 4:02 pm

AHA!! That octagonal part, I have, Mark! Sorry about the miscommunication on my e-mail reply! I will trace this for you when I get home, scan and e-mail it to you! I don't have the part number 1 in that drawing...

Are you using this for a cub or a Super A?

Mike in La Crosse, WI