Farmall Cub

Does anyone have the dimensions of the following:
PLATE, pivot axle brace mounting, Part # 650307R3
for a 60" IH Leveling and Grader Blade Plate?

http://www1.caseih.com/northamerica/PartsService/Pages/search.aspx
Click on:
Begin your search for the parts you need right here.
Type in the two words for the pasword.
Type in: 60 International Harvester Leveling & Grader Blade
Click on: Figure Listing
Click on: G-4 MOUNTING FRAME AND LIFTING LEVER - 60 LEVELING AND GRADER BLADE
It's item #2 on the 60 INTERNATIONAL HAR / G-4 MOUNTING FRAME AND LIFTING LEVER - 60 LEVELING AND GRADER BLADE
I need to make one for my blade.
Thanks in advance.
Mark

Mark:

You might want to ask WisconsinCubman - Mike. He has a 1A-60 Blade which probably is the right model. Here is the : McCormick 1A-60 Leveling and Grader. It is a pdf file so just right click and save target as.

AHA!! That octagonal part, I have, Mark! Sorry about the miscommunication on my e-mail reply! I will trace this for you when I get home, scan and e-mail it to you! I don't have the part number 1 in that drawing...

Are you using this for a cub or a Super A?

Mike in La Crosse, WI

Henry,
I know that this is an old thread wondering if you still have that part drawing you can send

Better yet, if that drawing is available, it should be sent to Dennis for inclusion in the member made drawings & diagrams on the site for all to use.