Will this Blade fit an A?

Farmall Super A, AV, 100, 130, & 140 1939 - 1973

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
dbanjo0335
5+ Years
5+ Years
Posts: 22
Joined: Sun Apr 05, 2009 2:32 pm
Zip Code: 29687

Will this Blade fit an A?

Postby dbanjo0335 » Sun Apr 11, 2010 12:00 am

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=160420492886&ssPageName=STRK:MEWAX:IT#ht_500wt_1182

says it's for a super a. my question is, will it work with a regular a and/or will I need any other hardware in order to attach/use it with a standard a?

Thanks,
Del

User avatar
EZ
10+ Years
10+ Years
501 Club
501 Club
Posts: 1058
Joined: Tue Feb 11, 2003 6:33 pm
Location: Northern Ontario

Re: Will this Blade fit an A?

Postby EZ » Sun Apr 11, 2010 9:19 am

Will more than likely fit. But, you will require some means of lifting it.
Hand lift or Touch Control.
Looks like a nice blade from here.
Just Do It !

Jim Becker
Team Cub
Team Cub
501 Club
501 Club
Posts: 12164
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: Will this Blade fit an A?

Postby Jim Becker » Sun Apr 11, 2010 10:17 am

IH made a hand lift package for that blade to use it on an A. It consisted of a lever that mounted above the transmission, a rockshaft for below the gas tank, and a couple linkage parts. You would probably have to look long and wide for those parts (I've only seen 1). But if you can come up with some way of lifting it, the rest will bolt right onto an A (unless something has been modified).


Return to “Farmall A, Super A, AV, 100, 130 & 140”

Who is online

Users browsing this forum: No registered users and 1 guest