http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=160420492886&ssPageName=STRK:MEWAX:IT#ht_500wt_1182
says it's for a super a. my question is, will it work with a regular a and/or will I need any other hardware in order to attach/use it with a standard a?
Thanks,
Del
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Will this Blade fit an A?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 22
- Joined: Sun Apr 05, 2009 2:32 pm
- Zip Code: 29687
- EZ
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
Re: Will this Blade fit an A?
Will more than likely fit. But, you will require some means of lifting it.
Hand lift or Touch Control.
Looks like a nice blade from here.
Hand lift or Touch Control.
Looks like a nice blade from here.
Just Do It !
-
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Will this Blade fit an A?
IH made a hand lift package for that blade to use it on an A. It consisted of a lever that mounted above the transmission, a rockshaft for below the gas tank, and a couple linkage parts. You would probably have to look long and wide for those parts (I've only seen 1). But if you can come up with some way of lifting it, the rest will bolt right onto an A (unless something has been modified).
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 9 guests