Farmall Cub

I want to clean the carburetor for my AV and install a new kit, but can't find one on the internet. I know I haven't checked all possible places but can someone point me in the right direction? Carburetor is a Zenith, numbers on the tag are 375560R91 and 12613A. Thanks for any help.

Joey wrote:I want to clean the carburetor for my AV and install a new kit, but can't find one on the internet. I know I haven't checked all possible places but can someone point me in the right direction? Carburetor is a Zenith, numbers on the tag are 375560R91 and 12613A. Thanks for any help.

Lookup "thecarburatorstore" and see if they sell kits. I know you can get new carbs from them.

Have you tried your autoparts store?

Valu-bilt has one for $20.04 for carb 12613. Valu-bil also lists the same carb kit for the A, Super A, B, Super C, 100, 130, 140, 200, 230 and 240.

Jason,
I looked at the carburetorstore first and for the kits listed, I didn't see the number of my carb.

Eugene,
thanks for the link, I think I'll give them a call. However, I think the kit you were talking about lists for $31.56. That the right kit?

Joey wrote:Carburetor is a Zenith, numbers on the tag are 375560R91 and 12613A.

375560R91 appears to be a Case/IH part number. 12613 appears in the Valu-Bilt 2010 catalog with their part number A604101 for $20.04. You will also have shipping and perhaps sales tax on top of the $20.04.

Have you contacted some of the advertisers on this board.
Visit you local auto parts store - the place were the counter people want to be of service.
Near by Case/IH dealership.
New Holland dealership - take in the IH part number.
Any tractor dealership. They will have parts books under the counter.

The carburetor kit should be reasonably available since in matches a number of IH tractors.

My nearest Case/IH dealership will take a telephone order and for one additional dollar deliver to an in town gas station, saving me a 30 mile round trip.

Joey:

Call Ken at Carter & Grunewald. They are a CaseIH Dealer and well... Ken is pretty good with IH tractors