Farmall Super A, AV, 1939 - 1954
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Wed Aug 18, 2010 10:37 pm
Any good designs for a step for a Farmall A?
Wed Aug 18, 2010 10:44 pm
I don't have an A, but here's one on eBay that might give you design ideas: http://cgi.ebay.com/Farmall-Cub-AV-SA-S ... ltDomain_0
Thu Aug 19, 2010 6:56 am
TM Tractor has a step listed for the A.
Thu Aug 19, 2010 6:05 pm
That would work except I have a bar using one of those holes. See attached.
Fri Aug 20, 2010 9:57 am
i would modify a step that used the front two mounting holes to step out around what you have mounted in the lower hole. then just use a longer bolt in that location.
i'll get a picture of one of mine tonight.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.