Tue Nov 02, 2010 9:17 am
I have a 1942 Farmall A with an aftermarket hydraulic unit run by the PTO shaft. It is a pump and tank unit attached by brackets just adjacent to the PTO. No markings are evident but my research seems to show that it is a
char lynn E 600 model, which were made to fit many tractors simply by using different brackets. Any information you have about this model, especially manuals, would be helpful.Thanks.
Tue Nov 02, 2010 12:33 pm
Dan - I have the owner's manual for the Char-Lynn E 600. I can scan and e-mail it to you (if you send me your e-mail). Or you can check out the images in my photo directory:http://photos.cubfest.com/thumbnails.php?album=1079
Tue Nov 02, 2010 8:33 pm
Had one. Didn't work so I took it apart. Called Char Lynn asking about parts. The folks I talked to didn't know any thing about the unit. Even when I gave them part numbers stamped on internal parts.
Mon Nov 08, 2010 9:57 am
Big Dog: I viewed the posted pictures on the local library computer but couldn't get good prints made. I'll have my daughter contact you so you can e-mail the images to her. Many thanks for your help.
Sun Mar 31, 2013 7:55 pm
Would it be possible to get a copy of the Char lynn HI Lo PAC E600 manual? I just received one from a neighbor more or less complete and want to get it hooked to a AV we have here to run a single circuit trip bucket.
Sun Mar 31, 2013 8:29 pm
G'day to you. This is an old post. As Big Dog said, click on this link for the Char Lynn E600 Manual
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.