Page 1 of 1

Color of Super A Grader Blade

Posted: Fri May 27, 2011 9:04 pm
by Atlantic Maritimer
Can someone tell me the color of the grader blade for a super a? I've seen some white, Blue and the 2150 Red.

Re: Color of Super A Grader Blade

Posted: Fri May 27, 2011 9:39 pm
by Don McCombs
Mine is in original finish with decals visible. It is red.

Re: Color of Super A Grader Blade

Posted: Fri May 27, 2011 9:59 pm
by Dale Finch
Gee, procrastination DOES work...I am almost ready to sandblast my blade for my SA, and was wondering the same thing. Was everything painted red? Liket all the braces, etc? Any other colors on it? Thanks for the info.

Dale F

Re: Color of Super A Grader Blade

Posted: Fri May 27, 2011 10:07 pm
by Jim Becker
Every part, entirely red.

Re: Color of Super A Grader Blade

Posted: Fri May 27, 2011 10:17 pm
by Dale Finch
That certainly makes it easy!! Thanks!

Dale F

PS How about the blade for the Cub?

Re: Color of Super A Grader Blade

Posted: Sat May 28, 2011 6:47 am
by Hengy
Jim Becker wrote:Every part, entirely red.


All the way through production? If you would have asked me to swear on a stack of bibles, I would have sworn that I saw what looked like original blue paint amongst the rust flakes on a 60 grader blade that we disassembled at the cheesy fest. Must have been a repaint at one point, but the patina of the blade sure said original.

Mike in La Crosse, WI

Re: Color of Super A Grader Blade

Posted: Sat May 28, 2011 6:56 am
by Winfield Dave
BDFinch wrote:PS How about the blade for the Cub?
Dale...I think this is original 1948 Grader Blade - for your show Cub, or worker

Re: Color of Super A Grader Blade

Posted: Sat May 28, 2011 8:15 am
by Dale Finch
Even better! Thanks all!

Dale F

Re: Color of Super A Grader Blade

Posted: Sat May 28, 2011 9:58 am
by Jim Becker
WisconsinCubMan wrote:
Jim Becker wrote:Every part, entirely red.


All the way through production? If you would have asked me to swear on a stack of bibles, I would have sworn that I saw what looked like original blue paint amongst the rust flakes on a 60 grader blade that we disassembled at the cheesy fest. Must have been a repaint at one point, but the patina of the blade sure said original.

Mike in La Crosse, WI

I thought the pigment shortage problems were resolved before the A-60 blade came out. If not, some of the very early blades could have been blue. In any case, the original question I was responding to was Dale's question about miscellaneous parts of a red blade. Whatever color a blade was, it was entirely one color.

Re: Color of Super A Grader Blade

Posted: Sat May 28, 2011 9:24 pm
by Hengy
Thanks, Jim... The blade itself was definitely red on the blade from the Cheesy Fest, but the arms had a blue tinge to them... But there was such a small amount of paint that I could have misjudged...

Mike in La Crosse, WI

Re: Color of Super A Grader Blade

Posted: Tue May 31, 2011 8:07 pm
by RUSTY2
As far as I know my blade is all origional
everything is red with yellow stenciled letters "Cub level and grader blade " on the frame

Re: Color of Super A Grader Blade

Posted: Tue May 31, 2011 8:13 pm
by Atlantic Maritimer
Just checked the replies, thanks guy's for all the input. Ijust finished my super A...boy does it look good. The blade needs a brace or two removed,then I'll just put solid square stock inplace of the original tube. I'll try to put it back to the original shape.Then I'll blast it and paint it 2150 red. Is there a place I can get the decals for the blade?

Re: Color of Super A Grader Blade

Posted: Wed Jun 01, 2011 6:30 am
by Hengy
Jim,

Did IH ever use any type of primer on the implements unlike how they painted the tractors?

Mike in La Crosse, WI

Re: Color of Super A Grader Blade

Posted: Wed Jun 01, 2011 9:41 am
by Jim Becker
WisconsinCubMan wrote:Did IH ever use any type of primer on the implements unlike how they painted the tractors?

I doubt it.