Super A versus Farmall 100

[Hengy]

Hello all!

Wondering if the A-60 blade for the Super A will work on a Farmall 100 without major modification?

Thanks!

Mike in La Crosse, WI

[Boss Hog]

yes

[Hengy]

Thanks!

Mike in La Crosse, WI

[mark1757]

Hello all!

Wondering if the A-60 blade for the Super A will work on a Farmall 100 without major modification?

Thanks!

Mike in La Crosse, WI

Mike,
I found the following:
http://www.cleancomputes.com/Cub/Cub%20Implement%20Manuals/Cub-Grader%20Blade/Cub%20Grader%20Blade%20Brochure/Cub-Grader%20Blade%20Brochure.htm
Page 6 says that it will fit.
Mark

[Boss Hog]

Hello all!

Wondering if the A-60 blade for the Super A will work on a Farmall 100 without major modification?

Thanks!

Mike in La Crosse, WI

Mike,
I found the following:
http://www.cleancomputes.com/Cub/Cub%20Implement%20Manuals/Cub-Grader%20Blade/Cub%20Grader%20Blade%20Brochure/Cub-Grader%20Blade%20Brochure.htm
Page 6 says that it will fit.
Mark

He He He Boss Hog said it will fit
you can take that to the bank

[Hengy]

The deposit was already in the bank when Boss Man said!!

Mike in La Crosse, WI

[Super A]

The Super A, 100, 130, and 140 are all basically the same tractor. If it will fit a Super A it should fit any of the others. Only exception is fast hitch stuff if the tractor doesn' have one.

Now the straight A is a whole 'nother animal. Very, very few implements that fit the other tractors will fit a straight Farmall A.

Al