Farmall Super A, AV, 1939 - 1954
Mon Aug 15, 2011 8:51 pm
will a Farmall A with a 6ft woods belly mower work ok to cut my lawn? Seems a little big for this tractor, but will be cutting weekly. Should I walk away or look further?
Mon Aug 15, 2011 9:06 pm
If the A is in reasonable condition it will handle it fine.
Mon Aug 15, 2011 10:31 pm
That is the exact mower built for that tractor. Like BD said, if it's in reasonably good running condition, it will handle it with ease.
Thu Aug 18, 2011 9:37 am
I have a woods 6' mower on my A and it cuts fantastic! 3rd gear 12" tall not problem!
Thu Aug 18, 2011 1:53 pm
I would say that a good strong A should be able to handle that mower just fine. My Super A handles the L59 without issues, and the 140 really has no problem. However, I would not try mowing tall or very heavy grass in anything but 2nd and below. Keep your blades nice and sharp, make sure the front of the deck is a bit lower then the back, and you should be going like a Boeing in no time. These mowers cut really well, and will give years of good service if taken care of.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.