Page 1 of 1

Help identify this implement please

Posted: Mon Oct 03, 2011 1:50 pm
by divadavidcars
i got this in a purchase i just made on a Cub. i forgot to ask what it was. It has an inlet on the top and on the bottom of the black tube. Look like water inlets, but not sure. there is a cable and 2 pullies. Not sure if its some kind opf lift or what.

Re: Help identify this implement please

Posted: Mon Oct 03, 2011 1:53 pm
by cubbrian
That appears to be part of a Farmall A/B exhaust lift.

Re: Help identify this implement please

Posted: Mon Oct 03, 2011 1:54 pm
by RaymondDurban
Exhaust lift for an International letter series tractor I believe.

Edit: as mentioned, part of the lift

Re: Help identify this implement please

Posted: Mon Oct 03, 2011 1:54 pm
by Pony Master
That is an exhaust lift. I have never seen one on a cub and if that is all you got with it then you are missing several parts.

Re: Help identify this implement please

Posted: Mon Oct 03, 2011 2:01 pm
by Cub-Bud
If you don't need that, and would like to sell it, send me a PM.

Re: Help identify this implement please

Posted: Mon Oct 03, 2011 3:04 pm
by Jim Becker
The cylinder is for the exhaust lift system on a Farmall A or B. The other parts attached to it are specific to use of that cylinder with a cultivator.

Re: Help identify this implement please

Posted: Mon Oct 03, 2011 3:42 pm
by divadavidcars
thanks. ill just have to figure out what all goes with it now. ill find some diagrams

Re: Help identify this implement please

Posted: Wed Oct 19, 2011 7:49 pm
by Cub-Bud
Have you had a chance to locate anymore parts that go with these :?: