Farmall Cub

One quick question...
Will a Farmall "B" or "C" fan shroud work for a Farmall "A"?
They seem like they are the same part.
Mike.

yup same engine C113. if its a later super C it wont fit. the radiator is taller by a couple of inches to accomodate the water pump and the C123 engine. a gap between the touch control and the fuel tank will identify the later tractors easily

Hey Art, will then the radiator from a regular C, fit an A or B? And the front grill?

Thanks

Art, what do you mean that the touch control gap from the gas tank will easily identify a later model?


Tom

yup they will fit. a farmall B or BN is simply an A with different axle tubes and a narrow front end. a C used the same engine/bolster/radiator setup on a different transmission for the purpose of having adjustable axles like the H and M

on an A, the fuel tank right on top of the touch control. the Super A1 (late tractors) and the super C will have a gap between the tank and the touch control to correspond to the taller radiator. you can see air under the tank on these tractors.

thanks Art

Dale Shaw wrote:Hey Art, will then the radiator from a regular C, fit an A or B? And the front grill?

Thanks

Bottom section of the grille on the B and C is different than the A/Super A. The B/C grille will bolt onto a Super A, not sure about vice versa.

Al

Don't have a book handy to look it up, but some Cs came with a water pump. Several nearby parts had to change for the pump. I don't know if the shroud changed or not.

I did some photo comparing on google and asked myself if I felt lucky. Well I figured $35 shipped was a reasonable gamble and went for it.
If you see it go back up on ebay you can assume it didn't work.
Incidentally, I don't think I mentioned that my Dad graced me with a blasting cabinet from Harbor freight for Christmas. Thanks Dad.
Spring will bring more than flowers.

Mike.