Farmall Cub

I have purchased a set of two way plows for a super A. I know that I am missing some parts to hook them up but do not know exactly what they look like. Does anyone have pictures of how they hook up? Or even a manual for them?
Thanks
Mr Joshua

TTT
I believe they are A189 plows. Can anyone help?
Josh

I have searched and found a few pics over on YT, but nothing showing the up-latch locking mechanisms. The beams connect to the drawbar in the same manner as the Cub. The depth is controlled by a link bar from the draw bar to the touch control. Chains connect each plow to each side of the rear lift respectively. Don't have any other info...

From YT....

My latest Super A has the two way plow rockshaft, minus the "trip levers." If pictures of that assembly will help, lemme know. I also have the SAI-1A Farm Equipment for Use with the Super A. I will be glad to copy some pages for you if it will help--should have the A-189 parts breakdown in it.

Al

Here is a picture of the split rockshaft someone had for sale on YT. The lugs for a top link have been added.

Jim's pic is about as good as you're gonna get. But here is one I took at FL. Flywheelers a couple years ago.

Thanks a lot guys. i really appreciate it.

Al If you can get me some pages from the manual that would be great.

I believe the only part I am missing is the depth lever link bar. Anyone know where I can get one of them. I may be able to make one if I have to.
Thanks again everyone.
Josh

Mr Joshua wrote:Thanks a lot guys. i really appreciate it.

Al If you can get me some pages from the manual that would be great.

I believe the only part I am missing is the depth lever link bar. Anyone know where I can get one of them. I may be able to make one if I have to.
Thanks again everyone.
Josh

Nice plow setup, I will check with the guy I got my 130 from he may have one laying around I will be going over there in a week or so ill let you know.

Mr Joshua wrote:Thanks a lot guys. i really appreciate it.

Al If you can get me some pages from the manual that would be great.

I believe the only part I am missing is the depth lever link bar. Anyone know where I can get one of them. I may be able to make one if I have to.
Thanks again everyone.
Josh

I'll try to get some together this weekend.

Al

thanks guys.
let me know what you come up with.
Josh

Hello
I have all the parts for that plow set up and would love to sell them. I will give you a good price. I can take to Hog Waller or send to the cub tug or other was to get the parts to you. what parts do you need. did not have time to read the whole post running out the door.

Bob Phillips

Guys
Josh is missing this rod and i have one. What do you think a fair price is?

I have figured out exactly what i need. Does anyone want to sell or know where to get the depth bar.

thanks
Mr joshua

OK,,Josh needs one,And YOU have one,,the sky is the limit!!! supply and demand!!! $$$$$ and shipping.Kevin I wouldn't kill him,,,he has gotten stuff from me!!!

sorry guys i selected the wrong picture. This is the one i wanted.