Farmall Super A, AV, 1939 - 1954
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Tue Mar 13, 2012 8:47 pm
Hi, I have a 1940 non-electric farmall A with a cracked block and I traded some parts for another engine. This new engine has the serial # M 203446 FAA Stamped on it. I think this is a newer engine. Will it work as a transplant on my tractor? I got just the striped down block so I don't know if it needs a water pump or not. Any advise would be very helpful. Thanks
Tue Mar 13, 2012 9:16 pm
It should work. Super A engines would be above 250001, although a Super A engine should bolt in also.
I have a 40 A parts tractor, and it must've gotten a replacement block. The casting code is 1942 on it and it has no serial number stamped on it at all.
Fri Apr 06, 2012 3:09 pm
Should work fine. My 1946 A has a 1945 B motor. Same engine was used for a lot of them
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.