Page 1 of 1

FEL , Super A

Posted: Wed Jul 04, 2012 3:28 pm
by TWheat
Got it working pretty good, but taken before additional reservoir added. Thanks to Jim Becker for advice & suggestions.

Re: FEL , Super A

Posted: Thu Jul 05, 2012 8:01 am
by Mr Joshua
Wow that's what I want!!

Re: FEL , Super A

Posted: Thu Jul 05, 2012 9:27 am
by Tezell
Nice!

Re: FEL , Super A

Posted: Thu Jul 05, 2012 3:08 pm
by TWheat
Thanks,
It is a modified loader made by Brantley Mfg. Co . of Frederick, OK. The hoses were shot, but no welds and the clyinders were good. This is what it looked like "before"

Re: FEL , Super A

Posted: Tue Jul 31, 2012 6:30 pm
by Matt Kirsch
Looks great but just a suggestion... More bracing.

Right now that is putting almost all the force on the bell housing. I would run braces from the tops of the towers down to the front cultivator mount at least, and maybe two more from the tops of the towers down to the finals. The low braces are a good start but frankly it needs more.

Re: FEL , Super A

Posted: Wed Aug 01, 2012 3:05 pm
by TWheat
Thanks Matt, something to think about. It doesn't do a lot of work, in fact the relief bypass settingis pretty low right now, just haven't gotten into setting the pressure up some.