Does anyone know off hand what size bolts are uses to hold the grill on?
Thanks
Mj
Grill bolts
Moderator: Team Cub
7 posts
• Page 1 of 1
Grill bolts
by Mr Joshua » Mon Aug 13, 2012 2:25 pm
Mr. Joshua
74 VW super beetle (o\ /o)
1955 cub
1951 Super A
1945 A
and any of TC's toys
74 VW super beetle (o\ /o)
1955 cub
1951 Super A
1945 A
and any of TC's toys
-
Mr Joshua - Cub Star!!
- Posts: 371
- Joined: Sun Sep 21, 2008 9:12 pm
- Location: Dittmer, mo
- Zip Code: 63023
- Tractors Owned: 1955 Farmall Cub
1951 Super A
1945 A 
- Circle of Safety: Y
Re: Grill bolts
by Don McCombs » Mon Aug 13, 2012 6:42 pm
I'll try to remember to check on mine tomorrow, unless someone responds sooner.
Don McCombs
MD, Deep Creek Lake
"1950 Something" Farmall Cub, Cub-193 Moldboard Plow
1977 IH Cub w/FH, L-F194 Moldboard Plow, L-38 Disk, L-F1 Platform Carrier, Mott FHC Mower
1948 Farmall Super A, IH 22 Mower
1951 Farmall Super C w/FH
MD, Deep Creek Lake
"1950 Something" Farmall Cub, Cub-193 Moldboard Plow
1977 IH Cub w/FH, L-F194 Moldboard Plow, L-38 Disk, L-F1 Platform Carrier, Mott FHC Mower
1948 Farmall Super A, IH 22 Mower
1951 Farmall Super C w/FH
-
Don McCombs - Cub Pro
- Posts: 9520
- Joined: Mon Feb 03, 2003 6:45 am
- Location: MD, Deep Creek Lake
- Zip Code: 21550
- Tractors Owned: .
"1950 Something" Farmall Cub
1977 IH Cub w/FH
1948 Farmall Super A
1951 Farmall Super C w/FH - Circle of Safety: Y
Re: Grill bolts
by Dale Finch » Mon Aug 13, 2012 7:12 pm
I had only one of the three PROPER bolts that hold the grill on, so when I reassembled I simply used a standard bolt. The "real" one had a slight gap and thinner area between the bottom of the head and the beginning of the threads. They are item #8 of the link below:
http://www.cleancomputes.com/Cub/Super%20A%20-%20Super%20AV/TC-39B%20Parts%20Catalog/Page%20146.jpg
http://www.cleancomputes.com/Cub/Super%20A%20-%20Super%20AV/TC-39B%20Parts%20Catalog/Page%20147.jpg
I THINK the size I used was a 5/16" (fine?) but I would have to check. Hopefully Don will come up with it!
http://www.cleancomputes.com/Cub/Super%20A%20-%20Super%20AV/TC-39B%20Parts%20Catalog/Page%20146.jpg
http://www.cleancomputes.com/Cub/Super%20A%20-%20Super%20AV/TC-39B%20Parts%20Catalog/Page%20147.jpg
I THINK the size I used was a 5/16" (fine?) but I would have to check. Hopefully Don will come up with it!
Dale Finch
-
Dale Finch - 501 Club
- Posts: 1086
- Joined: Tue Apr 27, 2010 11:34 am
- Location: NC, Chapel Hill
- Zip Code: 27517
- Tractors Owned: '55 Cub "Bertha"
'52 Cub "Bobbie"
'48 Super A "Bubba"
'48 Super A (parting out) - Circle of Safety: Y
Re: Grill bolts
by bob in CT » Mon Aug 13, 2012 7:47 pm
1/4-20 x 1/2" truss head slotted screw. originals are cad plated. I use stainless screws from McMaster-Carr.
http://www.mcmaster.com/#machine-screw-fasteners/=iu5s1k
FYI: you can find out the specs for just about any fastener in the parts books. They are available in 2 different manual resource pages listed above. Find the part that the fastener holds in the diagram and then look up the number in the following page. You will get the factory part number and any fasteners used right down to the washer spec.
Edit: Sorry, I answered for a Cub. I don't have Super A info- I have been building a spreadsheet for every fastener on a 1950 Cub as I work on the project. The one exception to the fastener listings is when it comes to specialty fasteners ( like Cub head bolts, for example) that have an IH part number. This part number is 58 141 DA, but they don't list the dimensions.
http://www.mcmaster.com/#machine-screw-fasteners/=iu5s1k
FYI: you can find out the specs for just about any fastener in the parts books. They are available in 2 different manual resource pages listed above. Find the part that the fastener holds in the diagram and then look up the number in the following page. You will get the factory part number and any fasteners used right down to the washer spec.
Edit: Sorry, I answered for a Cub. I don't have Super A info- I have been building a spreadsheet for every fastener on a 1950 Cub as I work on the project. The one exception to the fastener listings is when it comes to specialty fasteners ( like Cub head bolts, for example) that have an IH part number. This part number is 58 141 DA, but they don't list the dimensions.
Last edited by bob in CT on Tue Aug 14, 2012 5:03 am, edited 1 time in total.
-
bob in CT - Cub Pro
- Posts: 5118
- Joined: Thu Jun 07, 2007 9:34 am
- Location: CT, Manchester
- Zip Code: 06040
- Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
- Circle of Safety: Y
Re: Grill bolts
by Super A » Mon Aug 13, 2012 9:32 pm
Mr. Joshua, can you PM me one more time? I owe you some final covers and lug bolts!
Al
Al
"12 volt conversions are for quitters"
IH's are RED. Just say NO to yellow and white!
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
IH's are RED. Just say NO to yellow and white!
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
-
Super A - 501 Club
- Posts: 3069
- Joined: Mon Jan 26, 2004 10:53 am
- Location: NC, Jacksonville area
- Zip Code: 28521
- Tractors Owned: 1949 Cub "The Paperweight"
Cub powered IH 52R combine
Grandfather's 1948 Super A
White demo Super A-"Ol Whitey"
1950 Super A "Old Ugly"
1954 Super A-1
856
Buncha other junk - Circle of Safety: Y
Re: Grill bolts
by Mr Joshua » Tue Aug 14, 2012 2:27 pm
Thanks guys. After digging through a bunch of stuff from the po,I actually found the following originals.
Mr. Joshua
74 VW super beetle (o\ /o)
1955 cub
1951 Super A
1945 A
and any of TC's toys
74 VW super beetle (o\ /o)
1955 cub
1951 Super A
1945 A
and any of TC's toys
-
Mr Joshua - Cub Star!!
- Posts: 371
- Joined: Sun Sep 21, 2008 9:12 pm
- Location: Dittmer, mo
- Zip Code: 63023
- Tractors Owned: 1955 Farmall Cub
1951 Super A
1945 A - Circle of Safety: Y
Re: Grill bolts
by Don McCombs » Tue Aug 14, 2012 4:52 pm
Glad you found the originals. 5/16 fine thread. I just used a regular stainless cap screw. 3/4 length.
Don McCombs
MD, Deep Creek Lake
"1950 Something" Farmall Cub, Cub-193 Moldboard Plow
1977 IH Cub w/FH, L-F194 Moldboard Plow, L-38 Disk, L-F1 Platform Carrier, Mott FHC Mower
1948 Farmall Super A, IH 22 Mower
1951 Farmall Super C w/FH
MD, Deep Creek Lake
"1950 Something" Farmall Cub, Cub-193 Moldboard Plow
1977 IH Cub w/FH, L-F194 Moldboard Plow, L-38 Disk, L-F1 Platform Carrier, Mott FHC Mower
1948 Farmall Super A, IH 22 Mower
1951 Farmall Super C w/FH
-
Don McCombs - Cub Pro
- Posts: 9520
- Joined: Mon Feb 03, 2003 6:45 am
- Location: MD, Deep Creek Lake
- Zip Code: 21550
- Tractors Owned: .
"1950 Something" Farmall Cub
1977 IH Cub w/FH
1948 Farmall Super A
1951 Farmall Super C w/FH - Circle of Safety: Y
7 posts
• Page 1 of 1
Return to Farmall A, Super A, AV
Who is online
Users browsing this forum: No registered users and 1 guest
|
|