This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Brake pedal bushing

Farmall Super A, AV, 100, 130, & 140 1939 - 1973
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
snowdad
10+ Years
10+ Years
Posts: 22
Joined: Tue Nov 13, 2012 11:37 pm
Zip Code: 37150

Brake pedal bushing

Postby snowdad » Tue Mar 19, 2013 2:44 pm

Has anyone ever replaced the brake pedal bushing that is housed in the attachment under the clutch housing/tube? There is a lot of play in my brake shaft and according to a diagram there is a bushing there. If anyone has the number or the diminsions I would be much appreciative. Thanks
Phillip

SPONSOR AD

Sponsor



Sponsor
 

Bob McCarty
Team Cub
Team Cub
Posts: 11827
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: Brake pedal bushing

Postby Bob McCarty » Tue Mar 19, 2013 3:59 pm

Which model tractor?

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein

snowdad
10+ Years
10+ Years
Posts: 22
Joined: Tue Nov 13, 2012 11:37 pm
Zip Code: 37150

Re: Brake pedal bushing

Postby snowdad » Tue Mar 26, 2013 9:19 pm

Sorry. Neglected to post that. It is the Super A.

User avatar
Barnyard
Team Cub
Team Cub
Posts: 24240
Joined: Tue Aug 07, 2007 3:39 pm
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety: Y
Location: OH, New Haven (Hamilton County)
Contact:

Re: Brake pedal bushing

Postby Barnyard » Tue Mar 26, 2013 10:08 pm

Image

If you mean 6A in the above drawing, the part number is 355805R1.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.

Circle of Safety

snowdad
10+ Years
10+ Years
Posts: 22
Joined: Tue Nov 13, 2012 11:37 pm
Zip Code: 37150

Re: Brake pedal bushing

Postby snowdad » Fri Mar 29, 2013 11:48 am

Thanks Barnyard. That is the one. Finally got the pedal off the shaft. This is the only difficulty I have had with my teardown and rebuild. Where could one find that bushing? Secondly, how does one go about removing and replacing the bushing? Never done a bushing before.
Phillip

User avatar
Barnyard
Team Cub
Team Cub
Posts: 24240
Joined: Tue Aug 07, 2007 3:39 pm
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety: Y
Location: OH, New Haven (Hamilton County)
Contact:

Re: Brake pedal bushing

Postby Barnyard » Fri Mar 29, 2013 12:33 pm

Phillip, I'm not sure it is still available from a dealer. You can try checking with your nearest Case-IH dealer.

As for removal, I have never done one but it may just tap out and the new one tapped back in.

If you get it out in one piece you may be able to find a suitable replacement at TSC or possibbly a hardware store.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.

Circle of Safety

snowdad
10+ Years
10+ Years
Posts: 22
Joined: Tue Nov 13, 2012 11:37 pm
Zip Code: 37150

Re: Brake pedal bushing

Postby snowdad » Fri Mar 29, 2013 5:09 pm

Thanks. Will try that.

Daniel H.
10+ Years
10+ Years
Posts: 613
Joined: Mon Feb 03, 2003 1:18 pm
Zip Code: 27055
Tractors Owned: 1951 Super A
1955 Cub Lo-boy
1955 Ferguson TO-35
Circle of Safety: Y
Location: NC, Yadkinville

Re: Brake pedal bushing

Postby Daniel H. » Fri Mar 29, 2013 9:18 pm

Case IH says 2 required at $40 each. That is crazy.
The four most expensive words in tractor restoration: "We might as well..."


Return to “Farmall A, Super A, AV, 100, 130 & 140”

Who is online

Users browsing this forum: No registered users and 11 guests