This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Rebuilding Hydraulic Pump
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 2555
- Joined: Tue Aug 10, 2010 6:38 pm
- Zip Code: 35630
- Circle of Safety: Y
Rebuilding Hydraulic Pump
I have a couple spare hydraulic pumps laying in the shop and decided to rebuild them so I'd have them as needed. I gave Ken at C&G a call and he informed me that there isn't a "kit" like there is for a Cub. In fact, he said "there are only a couple o-rings in the pump, so we don't offer a rebuild kit. Clearly (after taking the pump apart) there are more than just 2 o-rings in the pump. I saw traces of the paper/fiber washers, shaft seal o-ring, pump o-rings, external o-rings for the manifold, the small "lock" for the bushings, and internal rubber gasket, etc. Are these parts available at all from CASE/IH, or anyone else?? He informed me there wasn't a "kit" and didn't offer or act like the individual parts were even available. What have you guys expierenced with this?
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
-
- 10+ Years
- Posts: 111
- Joined: Sat Mar 09, 2013 8:14 pm
- Zip Code: 39338
- eBay ID: dbboss
- Tractors Owned: '63 Massey Ferguson 35 diesel deluxe
'50 Farmall Cub
Re: Rebuilding Hydraulic Pump
Let me know what you find out. I think I have the same problem. High oil level, thin oil that smells like gas, but can't be, and low hydraulic level. So far that's the only thing major possible problem I have found.
-
- 10+ Years
- Posts: 111
- Joined: Sat Mar 09, 2013 8:14 pm
- Zip Code: 39338
- eBay ID: dbboss
- Tractors Owned: '63 Massey Ferguson 35 diesel deluxe
'50 Farmall Cub
Re: Rebuilding Hydraulic Pump
Check this kit out & see if maybe this is it.
http://www.farmallcubforever.com/product/355208R91
http://www.farmallcubforever.com/product/355208R91
-
- 10+ Years
- Posts: 3034
- Joined: Wed May 31, 2006 12:09 pm
- Zip Code: 74070
- Circle of Safety: Y
- Location: OK, Skiatook
Re: Rebuilding Hydraulic Pump
TM Tractor sells a rebuild kit for the pump.
-
- 10+ Years
- Posts: 2555
- Joined: Tue Aug 10, 2010 6:38 pm
- Zip Code: 35630
- Circle of Safety: Y
Re: Rebuilding Hydraulic Pump
This is for the Super A - 140 tractors; not a Cub. I didn't realize TM sold a kit for these tractors too.
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
-
- 10+ Years
- Posts: 3034
- Joined: Wed May 31, 2006 12:09 pm
- Zip Code: 74070
- Circle of Safety: Y
- Location: OK, Skiatook
Re: Rebuilding Hydraulic Pump
AL Farmall Boy wrote:This is for the Super A - 140 tractors; not a Cub. I didn't realize TM sold a kit for these tractors too.
Whoops
-
- 10+ Years
- Posts: 2555
- Joined: Tue Aug 10, 2010 6:38 pm
- Zip Code: 35630
- Circle of Safety: Y
Re: Rebuilding Hydraulic Pump
Lol, it's ok. yeah, hopefully I'll find the parts I need. I'm thinking Ken didn't fully understand what I was talking about; but then ....maybe CASE/IH doesn't offer the parts anymore. I think I will call another dealer to see what I can find out.
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
-
- 10+ Years
- Posts: 4949
- Joined: Tue Jun 08, 2004 3:04 pm
- Zip Code: 14559
- Circle of Safety: Y
- Location: Rochester, NY
Re: Rebuilding Hydraulic Pump
Ken is correct, there is no "kit" for the pump. You should be able to purchase the individual parts you need from CaseIH.
You presumably asked directly about a kit, he answered directly that there was no kit... Did you follow up and ask if you could order parts individually? If not, he may not have thought to offer it as an alternative.
Really the only thing that wears on these pumps is the seal in the input shaft. On partstore.caseih.com they list the seals at around $10 each.
One thing, on partstore.caseih.com, they don't show most of what you're describing.
You presumably asked directly about a kit, he answered directly that there was no kit... Did you follow up and ask if you could order parts individually? If not, he may not have thought to offer it as an alternative.
Really the only thing that wears on these pumps is the seal in the input shaft. On partstore.caseih.com they list the seals at around $10 each.
One thing, on partstore.caseih.com, they don't show most of what you're describing.
-
- 10+ Years
- Posts: 2555
- Joined: Tue Aug 10, 2010 6:38 pm
- Zip Code: 35630
- Circle of Safety: Y
Re: Rebuilding Hydraulic Pump
yeah, that site has it's flaws and there is "missing" stuff. No, Ken didn't offer it as an alternative and the context of the conversation was that as if I thought he would have, and he also sounded rushed, so I didn't say anything. I'm going to call again and see if I can get all of the individual parts, becuase all of my gaskets, o-rings, etc. are very hard and old.
* Thanks Matt
* Thanks Matt
Last edited by AL Farmall Boy on Tue Mar 26, 2013 9:48 am, edited 1 time in total.
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
-
- 10+ Years
- Posts: 1189
- Joined: Sat May 14, 2011 6:09 pm
- Zip Code: 15132
- Tractors Owned: 53 F Cub
73 F Cub
53 Super A With Snow/Grader Blade
193 Plow With Colter And Jointer
144 Cultivators
22 Mower - Circle of Safety: Y
- Location: Versailles,Pa.
Re: Rebuilding Hydraulic Pump
There's a very good partsman at the Case-IH dealer in Herscher, Il. that I've ordered many parts from. When I rebuilt the pump on my SA, I just gave him the part number off it and he sent me all the necessary parts for a rebuild. He actually takes the time to search different dealers stock to keep the customer happy. He also knows Cubs real well.
Tom
Tom
Know Your Cub, And Your Cub Will Know You.
Tom
Tom
-
- 10+ Years
- Posts: 2555
- Joined: Tue Aug 10, 2010 6:38 pm
- Zip Code: 35630
- Circle of Safety: Y
Re: Rebuilding Hydraulic Pump
thats good to know! I really like using Ken, but if he is busy or unavailable, I'll check them out! Thanks!
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
-
- 10+ Years
- Posts: 4949
- Joined: Tue Jun 08, 2004 3:04 pm
- Zip Code: 14559
- Circle of Safety: Y
- Location: Rochester, NY
Re: Rebuilding Hydraulic Pump
Now that I think about it, the pump internals might actually be in a different parts book, as they are third-party pumps. Cessna or Pesco, IIRC.
-
- 10+ Years
- Posts: 2555
- Joined: Tue Aug 10, 2010 6:38 pm
- Zip Code: 35630
- Circle of Safety: Y
Re: Rebuilding Hydraulic Pump
oh ok. That makes sense. If you know where I can find that info.....let me know.
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
-
- 10+ Years
- Posts: 1189
- Joined: Sat May 14, 2011 6:09 pm
- Zip Code: 15132
- Tractors Owned: 53 F Cub
73 F Cub
53 Super A With Snow/Grader Blade
193 Plow With Colter And Jointer
144 Cultivators
22 Mower - Circle of Safety: Y
- Location: Versailles,Pa.
Re: Rebuilding Hydraulic Pump
My parts book TC 39C, starting at page 237 shows the 2 different pumps. Pesco and Thompson. It shows part numbers for individual parts and part numbers for kits, with lots of different kits and individual part numbers for different PN pumps and different brands of pumps. The pumps are rather simple and not a lot of internals. If your pump is off and you have a part number off it, it might be a good idea to call Stollers CIH parts dept in Herscher Il, and ask for Wayne. I haven't talked to Wayne for 6 months and heard he was going to retire, but I don't know when. 1-815-426-2119
Tom
Edit- TC-39B is in Rudi's manuals section under Super A-AV with the same page numbers as my manual.
Tom
Edit- TC-39B is in Rudi's manuals section under Super A-AV with the same page numbers as my manual.
Know Your Cub, And Your Cub Will Know You.
Tom
Tom
-
- 10+ Years
- Posts: 2555
- Joined: Tue Aug 10, 2010 6:38 pm
- Zip Code: 35630
- Circle of Safety: Y
Re: Rebuilding Hydraulic Pump
Some great info. Thanks so much. I knew there were 2 different pumps made. Yeah, the internals are actually just like the Cub pump but bigger.
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Farmall A hydraulic pump
by LoganB » Wed Apr 28, 2021 9:19 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 6
- 507
-
by inairam
Sat Jun 05, 2021 6:10 am
-
-
-
Pulling the 100 oil pump. Attachment(s)
by customcutter » Mon May 15, 2023 3:00 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 12
- 619
-
by customcutter
Fri May 19, 2023 7:30 pm
-
-
-
A/SA/SAV Need to prime the oil pump?
by staninlowerAL » Thu Jan 12, 2023 5:57 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 2
- 110
-
by staninlowerAL
Thu Jan 12, 2023 9:33 pm
-
-
-
Hyd pump question on my 54 100
by Goinbroke2 » Fri Jun 04, 2021 8:46 am » in Farmall A, Super A, AV, 100, 130 & 140 - 6
- 316
-
by Goinbroke2
Sun Jun 06, 2021 2:29 pm
-
-
-
Front Hydrolics pump Attachment(s)
by inairam » Fri Oct 15, 2021 1:01 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 2
- 176
-
by inairam
Sun Oct 17, 2021 9:01 pm
-
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 2 guests