This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Rebuilding Hydraulic Pump

Farmall Super A, AV, 100, 130, & 140 1939 - 1973
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
AL Farmall Boy
10+ Years
10+ Years
Posts: 2555
Joined: Tue Aug 10, 2010 6:38 pm
Zip Code: 35630
Circle of Safety: Y

Rebuilding Hydraulic Pump

Postby AL Farmall Boy » Fri Mar 22, 2013 1:16 pm

I have a couple spare hydraulic pumps laying in the shop and decided to rebuild them so I'd have them as needed. I gave Ken at C&G a call and he informed me that there isn't a "kit" like there is for a Cub. In fact, he said "there are only a couple o-rings in the pump, so we don't offer a rebuild kit. Clearly (after taking the pump apart) there are more than just 2 o-rings in the pump. I saw traces of the paper/fiber washers, shaft seal o-ring, pump o-rings, external o-rings for the manifold, the small "lock" for the bushings, and internal rubber gasket, etc. Are these parts available at all from CASE/IH, or anyone else?? He informed me there wasn't a "kit" and didn't offer or act like the individual parts were even available. What have you guys expierenced with this?
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com

:tractor: Follow my page "Alabama Tractor Pickers" on YouTube & Facebook! :tractor:

SPONSOR AD

Sponsor



Sponsor
 

dbboss
10+ Years
10+ Years
Posts: 111
Joined: Sat Mar 09, 2013 8:14 pm
Zip Code: 39338
eBay ID: dbboss
Tractors Owned: '63 Massey Ferguson 35 diesel deluxe
'50 Farmall Cub

Re: Rebuilding Hydraulic Pump

Postby dbboss » Sat Mar 23, 2013 1:37 am

Let me know what you find out. I think I have the same problem. High oil level, thin oil that smells like gas, but can't be, and low hydraulic level. So far that's the only thing major possible problem I have found.

dbboss
10+ Years
10+ Years
Posts: 111
Joined: Sat Mar 09, 2013 8:14 pm
Zip Code: 39338
eBay ID: dbboss
Tractors Owned: '63 Massey Ferguson 35 diesel deluxe
'50 Farmall Cub

Re: Rebuilding Hydraulic Pump

Postby dbboss » Sat Mar 23, 2013 1:50 am

Check this kit out & see if maybe this is it.
http://www.farmallcubforever.com/product/355208R91

Bill E Bob
10+ Years
10+ Years
Posts: 3034
Joined: Wed May 31, 2006 12:09 pm
Zip Code: 74070
Circle of Safety: Y
Location: OK, Skiatook

Re: Rebuilding Hydraulic Pump

Postby Bill E Bob » Sat Mar 23, 2013 10:23 pm

TM Tractor sells a rebuild kit for the pump.

User avatar
AL Farmall Boy
10+ Years
10+ Years
Posts: 2555
Joined: Tue Aug 10, 2010 6:38 pm
Zip Code: 35630
Circle of Safety: Y

Re: Rebuilding Hydraulic Pump

Postby AL Farmall Boy » Sat Mar 23, 2013 10:39 pm

This is for the Super A - 140 tractors; not a Cub. I didn't realize TM sold a kit for these tractors too.
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com

:tractor: Follow my page "Alabama Tractor Pickers" on YouTube & Facebook! :tractor:

Bill E Bob
10+ Years
10+ Years
Posts: 3034
Joined: Wed May 31, 2006 12:09 pm
Zip Code: 74070
Circle of Safety: Y
Location: OK, Skiatook

Re: Rebuilding Hydraulic Pump

Postby Bill E Bob » Sat Mar 23, 2013 11:08 pm

AL Farmall Boy wrote:This is for the Super A - 140 tractors; not a Cub. I didn't realize TM sold a kit for these tractors too.

Whoops :!: :oops: :oops: :oops:

User avatar
AL Farmall Boy
10+ Years
10+ Years
Posts: 2555
Joined: Tue Aug 10, 2010 6:38 pm
Zip Code: 35630
Circle of Safety: Y

Re: Rebuilding Hydraulic Pump

Postby AL Farmall Boy » Mon Mar 25, 2013 9:51 am

Lol, it's ok. yeah, hopefully I'll find the parts I need. I'm thinking Ken didn't fully understand what I was talking about; but then ....maybe CASE/IH doesn't offer the parts anymore. I think I will call another dealer to see what I can find out.
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com

:tractor: Follow my page "Alabama Tractor Pickers" on YouTube & Facebook! :tractor:

Matt Kirsch
10+ Years
10+ Years
Posts: 4945
Joined: Tue Jun 08, 2004 3:04 pm
Zip Code: 14559
Circle of Safety: Y
Location: Rochester, NY

Re: Rebuilding Hydraulic Pump

Postby Matt Kirsch » Mon Mar 25, 2013 10:22 am

Ken is correct, there is no "kit" for the pump. You should be able to purchase the individual parts you need from CaseIH.

You presumably asked directly about a kit, he answered directly that there was no kit... Did you follow up and ask if you could order parts individually? If not, he may not have thought to offer it as an alternative.

Really the only thing that wears on these pumps is the seal in the input shaft. On partstore.caseih.com they list the seals at around $10 each.

One thing, on partstore.caseih.com, they don't show most of what you're describing.

User avatar
AL Farmall Boy
10+ Years
10+ Years
Posts: 2555
Joined: Tue Aug 10, 2010 6:38 pm
Zip Code: 35630
Circle of Safety: Y

Re: Rebuilding Hydraulic Pump

Postby AL Farmall Boy » Tue Mar 26, 2013 9:36 am

yeah, that site has it's flaws and there is "missing" stuff. No, Ken didn't offer it as an alternative and the context of the conversation was that as if I thought he would have, and he also sounded rushed, so I didn't say anything. I'm going to call again and see if I can get all of the individual parts, becuase all of my gaskets, o-rings, etc. are very hard and old.

* Thanks Matt
Last edited by AL Farmall Boy on Tue Mar 26, 2013 9:48 am, edited 1 time in total.
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com

:tractor: Follow my page "Alabama Tractor Pickers" on YouTube & Facebook! :tractor:

User avatar
twotone
10+ Years
10+ Years
Posts: 1189
Joined: Sat May 14, 2011 6:09 pm
Zip Code: 15132
Tractors Owned: 53 F Cub
73 F Cub
53 Super A With Snow/Grader Blade
193 Plow With Colter And Jointer
144 Cultivators
22 Mower
Circle of Safety: Y
Location: Versailles,Pa.

Re: Rebuilding Hydraulic Pump

Postby twotone » Tue Mar 26, 2013 9:43 am

There's a very good partsman at the Case-IH dealer in Herscher, Il. that I've ordered many parts from. When I rebuilt the pump on my SA, I just gave him the part number off it and he sent me all the necessary parts for a rebuild. He actually takes the time to search different dealers stock to keep the customer happy. He also knows Cubs real well.


Tom
Know Your Cub, And Your Cub Will Know You.

Tom

User avatar
AL Farmall Boy
10+ Years
10+ Years
Posts: 2555
Joined: Tue Aug 10, 2010 6:38 pm
Zip Code: 35630
Circle of Safety: Y

Re: Rebuilding Hydraulic Pump

Postby AL Farmall Boy » Tue Mar 26, 2013 10:08 am

thats good to know! I really like using Ken, but if he is busy or unavailable, I'll check them out! Thanks!
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com

:tractor: Follow my page "Alabama Tractor Pickers" on YouTube & Facebook! :tractor:

Matt Kirsch
10+ Years
10+ Years
Posts: 4945
Joined: Tue Jun 08, 2004 3:04 pm
Zip Code: 14559
Circle of Safety: Y
Location: Rochester, NY

Re: Rebuilding Hydraulic Pump

Postby Matt Kirsch » Tue Mar 26, 2013 1:19 pm

Now that I think about it, the pump internals might actually be in a different parts book, as they are third-party pumps. Cessna or Pesco, IIRC.

User avatar
AL Farmall Boy
10+ Years
10+ Years
Posts: 2555
Joined: Tue Aug 10, 2010 6:38 pm
Zip Code: 35630
Circle of Safety: Y

Re: Rebuilding Hydraulic Pump

Postby AL Farmall Boy » Tue Mar 26, 2013 1:34 pm

oh ok. That makes sense. If you know where I can find that info.....let me know.
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com

:tractor: Follow my page "Alabama Tractor Pickers" on YouTube & Facebook! :tractor:

User avatar
twotone
10+ Years
10+ Years
Posts: 1189
Joined: Sat May 14, 2011 6:09 pm
Zip Code: 15132
Tractors Owned: 53 F Cub
73 F Cub
53 Super A With Snow/Grader Blade
193 Plow With Colter And Jointer
144 Cultivators
22 Mower
Circle of Safety: Y
Location: Versailles,Pa.

Re: Rebuilding Hydraulic Pump

Postby twotone » Tue Mar 26, 2013 1:52 pm

My parts book TC 39C, starting at page 237 shows the 2 different pumps. Pesco and Thompson. It shows part numbers for individual parts and part numbers for kits, with lots of different kits and individual part numbers for different PN pumps and different brands of pumps. The pumps are rather simple and not a lot of internals. If your pump is off and you have a part number off it, it might be a good idea to call Stollers CIH parts dept in Herscher Il, and ask for Wayne. I haven't talked to Wayne for 6 months and heard he was going to retire, but I don't know when. 1-815-426-2119


Tom

Edit- TC-39B is in Rudi's manuals section under Super A-AV with the same page numbers as my manual.
Know Your Cub, And Your Cub Will Know You.

Tom

User avatar
AL Farmall Boy
10+ Years
10+ Years
Posts: 2555
Joined: Tue Aug 10, 2010 6:38 pm
Zip Code: 35630
Circle of Safety: Y

Re: Rebuilding Hydraulic Pump

Postby AL Farmall Boy » Tue Mar 26, 2013 5:09 pm

Some great info. Thanks so much. I knew there were 2 different pumps made. Yeah, the internals are actually just like the Cub pump but bigger.
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com

:tractor: Follow my page "Alabama Tractor Pickers" on YouTube & Facebook! :tractor:


Return to “Farmall A, Super A, AV, 100, 130 & 140”

Who is online

Users browsing this forum: No registered users and 5 guests