This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
farmall A
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
gwinkles
- 10+ Years
- Posts: 1
- Joined: Sat Aug 17, 2013 1:19 pm
- Zip Code: 30248
farmall A
Will not fire, coil is good, points have been clean and look good. Getting 12volts to coil. when i check with a volt meter I'm getting 12 volts even when i check from the neg side of coil to the ground side of the distributor, do not know if thats normal, any help would be appreciated.
-
John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: farmall A
At the distributor side of the coil you should get 12 volts when points are open and 0 volts when the points are closed (they provide the ground for the coil). You should see the meter going back and forth as the engine cranks over. If it is 12 volts all the time, you need to check wiring and points. some points have a clear coating that must be removed before using.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 12 guests
