Page 1 of 1
Puller for Removing the Crank Pulley
Posted: Sun Aug 18, 2013 12:06 pm
by AL Farmall Boy
Will the custom built puller for the Cub front crank pulley also work on the Farmall Super A (C-113 and C-123) engines? I know the removal procedure is basically the same, but I was wondering if that puller will fit or work on these like it does on the Cub. I would like to get one, and it would be a bonus if it would work with both engines. I have linked the puller if you are wondering what I am talking about.
http://farmallcub.com/phpBB2/viewtopic.php?f=11&t=34545Boss....I know you have worked on the C-113 and C-123 engines; how do you remove those crank pulleys?
Re: Puller for Removing the Crank Pulley
Posted: Sun Aug 18, 2013 8:48 pm
by raystractors
The size of the pulley on the A and Super A is larger, so the one that is made for the cub is too small. The differance between the two is not that great so you may be able to make one that would do either.
Re: Puller for Removing the Crank Pulley
Posted: Sun Aug 18, 2013 9:23 pm
by Boss Hog
Mine will work on both
Re: Puller for Removing the Crank Pulley
Posted: Mon Aug 19, 2013 8:38 am
by AL Farmall Boy
Boss Hog wrote:Mine will work on both
Do you have one that was made by someone on the forum, or made by you? I need to gets me one of dem things......or some details on building one. Doesn't look like there is much to it.
Re: Puller for Removing the Crank Pulley
Posted: Mon Aug 19, 2013 8:38 am
by AL Farmall Boy
Boss Hog wrote:Mine will work on both
Do you have one that was made by someone on the forum, or made by you? I need to gets me one of dem things......or some details on building one. Doesn't look like there is much to it.
Re: Puller for Removing the Crank Pulley
Posted: Mon Aug 19, 2013 3:26 pm
by raystractors
http://farmallcub.com/phpBB2/viewtopic.php?f=11&t=34545Here is the post about the removal of the cub front pulley. It does give the name of someone that can make these, but if you have some skills with metal you can make one yourself. I made one for myself that works well for the cub, but didn't think about the A's so it will not fit them. Take a measurement of the pulley on an A, and make the puller as small as will work on the A. This should also work on the cub.
Mine does not look as finished as the one in the post. Mine is made of square 6"X6"X1/2" steel, not as pretty but works as well.
Re: Puller for Removing the Crank Pulley
Posted: Tue Apr 22, 2014 1:59 pm
by Jonny5
Does anyone know how to get in touch with the person that makes the crank pulley for the cub?
Here is a link to the pulley I am talking about.
http://farmallcub.com/phpBB2/viewtopic.php?f=11&t=34545
Re: Puller for Removing the Crank Pulley
Posted: Tue Apr 22, 2014 2:52 pm
by Barnyard
Send a PM to Earl Fauble. His forum name is Earl.