This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Whining time while I wait! And one idea...
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Dale Finch
- 10+ Years
- Posts: 6645
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Whining time while I wait! And one idea...
Duplicate post...didn't mean to whine THAT much!
- Winfield Dave
- 10+ Years
- Posts: 3557
- Joined: Thu Apr 22, 2010 2:31 pm
- Zip Code: 17953
- Tractors Owned: ......Almost enough.
N3NIK - Circle of Safety: Y
- Location: PA, Middleport (Schuylkill County)
Re: Whining time while I wait! And one idea...
Does that mean twice as many ??
Dave
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
-
- 10+ Years
- Posts: 4975
- Joined: Fri Oct 29, 2010 11:34 pm
- Zip Code: 36558
- Tractors Owned: Cubs: (3)'49's, (1 is for parts), (1)'57 IH Cub LoBoy w/FH, (2)154 Number Series Loboys, (1 is for parts), '76 Longstripe w/FH, Mowers: C-22, Bush Hog 412, Pennington 59, Woods RM42CF, Woods 42, assorted FCub plows, planters, discs, etc. OTHERS: '49 AC B & Ind. Sickle mower, '61 AC D12 Ser 2, '52 8N, '56 Ferguson 35 Deluxe, '47 & '49 Avery V, '53 MM BG (offset), '51 JD M (regular), '56 JD 420C, with Blade and fire plow, '85 JD 850 (Yanmar) w/72" belly mower, '76? Yanmar 2TR15 1500 & Bush Hog SQ42S-2 mower, '78? FORD Dexta, '86 FORD LGT14D & 48" Mower, (2)Cub Cadets & Mowers (MTD), (4) Sears Surburban's, other MTD mowers, Jeeps & other misc. "treasures"
- Circle of Safety: Y
- Location: AL (Southwest)
Re: Whining time while I wait! And one idea...
I've always heard it said "any excuse is good enough for a party".
Stan in LA (lower AL)
USAF & Reserves, Reg ARMY, ARMY NG (AL)
USAF & Reserves, Reg ARMY, ARMY NG (AL)
- Dale Finch
- 10+ Years
- Posts: 6645
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: Whining time while I wait! And one idea...
As it ALWAYS seems to happen, just BEFORE the NAPA guy showed up, I was cleaning out the bucket where I drained the small amount of oil that had been left in the pan, and low-and-behold, there was the washer!!! Never fails, right?!
Anyway, everything is buttoned up (except hood and grill), so tomorrow afternoon I will crank him up, and see if there are any leaks! Keeping my fingers crossed...but may just take a cooler with a few just in case I need to whine some more tomorrow!!!
Anyway, everything is buttoned up (except hood and grill), so tomorrow afternoon I will crank him up, and see if there are any leaks! Keeping my fingers crossed...but may just take a cooler with a few just in case I need to whine some more tomorrow!!!
- Dale Finch
- 10+ Years
- Posts: 6645
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: Whining time while I wait! And one idea...
OK! So no whining for me today...yet! I bit the bullet and cranked the SA this morning...YEA! He lives again! Ammeter was correct, front engine seal did not leak, and at least the water pump belt was turning, so I assume it is also pumping! I had swapped out oil pressure gauges for the 0-75 psi one the book called for, and the pressure seemed a bit low, but I'm not used to that scale. I will need to keep an eye on it.
So, no tears in my beer this afternoon!!!
So, no tears in my beer this afternoon!!!
-
- 10+ Years
- Posts: 518
- Joined: Fri Feb 07, 2003 12:36 pm
- Location: WV, Morgantown
Re: Whining time while I wait! And one idea...
Dale, Where did you get your oil pressure gauge? I need to get one for my 140. Dave F.
- Dale Finch
- 10+ Years
- Posts: 6645
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: Whining time while I wait! And one idea...
I had gotten it from Jensales. It is the 0-75, screw in style.
http://www.jensales.com/products/international-140-0-75-psi-ihs459.html
They do have quite an assortment. You just have to scroll through. So far it is good, but then I just put it on. I did buy a Cub gauge from them, and it has been on for almost 2 years...looks and works fine!
http://www.jensales.com/products/international-140-0-75-psi-ihs459.html
They do have quite an assortment. You just have to scroll through. So far it is good, but then I just put it on. I did buy a Cub gauge from them, and it has been on for almost 2 years...looks and works fine!
- havoc1482
- 10+ Years
- Posts: 987
- Joined: Fri Sep 20, 2013 11:17 am
- Zip Code: 01085
- eBay ID: havoc1482
- Tractors Owned: _______ 1948 Farmall Super A
- Circle of Safety: Y
- Twitter ID: @havoc1482
- Location: Westfield, MA
- Contact:
Re: Whining time while I wait! And one idea...
Good oil pressure is like between 20-40. Mine goes to 40psi at startup and as it warms drops to like 25-30. I have a tractor supply 0-80psi one. So yeah on the 0-75 itll look a little low at operating temps because the old ones that had the Red/White range didn't go that high (I think)
Mike
I bleed Black & Gold
IH Collectors Club New England (Chapter 18)
Western Mass. (The 413)
I bleed Black & Gold
IH Collectors Club New England (Chapter 18)
Western Mass. (The 413)
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 8 guests