Super A Dash Assembly

Farmall Super A, AV, 100, 130, & 140 1939 - 1973

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
5+ Years
5+ Years
Posts: 60
Joined: Wed Feb 08, 2012 11:23 am
Zip Code: 07848
eBay ID: thatfarmallguy
Tractors Owned: 1943 Farmall M
1952 Farmall Cub
1951 Farmall Super A
1966 Farmall 140
Location: Andover, New Jersey

Super A Dash Assembly

Postby AGrinthal » Tue Sep 15, 2015 9:46 pm

I just picked up a 52 Super A with a bucket. The support arm running off the dash seems a little bent in and I'm trying to get a replacement. Could anyone tell me what a good price on this part should be? Also are the backs of these things left open? Mine has some sort of home made job on it. curious if its supposed to be left open (Stock) or its supposed to have a backing.

I've seen prices from $80 to $150 for this part. Functionally its ok. I'm just being anal. The steering wheel is bent as well. Probably because you have to be Arnold to turn the wheel if its not moving due to the bucket loader.

Andover, NJ

10+ Years
10+ Years
Posts: 277
Joined: Sun Dec 07, 2008 6:03 pm
Zip Code: 30134
Tractors Owned: 1948 Farmall Cub
1953 Farmall Super A
1952 Ford 8N
1958 John Deere 320S
1958 John Deere 420S
1958 John Deere 420T
2008 John Deere 3005
Location: GA, Douglasville

Re: Super A Dash Assembly

Postby Like-em-all » Thu Sep 17, 2015 9:43 am

AGrinthal wrote:I just picked up a 52 Super A with a bucket.

Whoa :shock: ! That must be some bucket! But then I read on...

As near as I can tell, the back side (side toward the battery) of the Super A dash was open. The early (up to S/N 348643) Super A's had a one piece battery box which acted as a "cover" for the dash back. Then at S/N 348644 (about mid 1953) the "box" became just 2 sides and a top (plus a front panel if no touch control was installed) with the battery acting as a "cover" for the dash (my interpretation of TC-39).

I have an extra dash/steering post that I will part with that appears to be good. I can try to e-mail a photo of it to you if you are interested. The cost will be whatever the shipping cost is.

"One Cub leads to another..." -- old International Harvester proverb.

User avatar
5+ Years
5+ Years
Posts: 987
Joined: Fri Sep 20, 2013 11:17 am
Zip Code: 01034
eBay ID: havoc1482
Tractors Owned: _______ 1948 Farmall Super A
Circle of Safety: Y
Twitter ID: @havoc1482
Location: Granville, MA

Re: Super A Dash Assembly

Postby havoc1482 » Thu Sep 17, 2015 3:23 pm

If you don't have a battery box to act as a cover I'd recommend making a cover or getting the Batt box. Its easy for water to find its way to your switches without it.

I bleed Black & Gold

IH Collectors Club New England (Chapter 18)

Western Mass. (The 413)

Jim Reid
10+ Years
10+ Years
Posts: 1124
Joined: Fri Jan 30, 2004 10:51 am
Location: East Bend,NC

Re: Super A Dash Assembly

Postby Jim Reid » Sun Sep 20, 2015 6:44 pm

I have a Super-A parts tractor if you can send me a picture of what you need I think I have it I also have a good steering wheel.


  • Similar Topics
    Last post

Return to “Farmall A, Super A, AV, 100, 130 & 140”

Who is online

Users browsing this forum: No registered users and 1 guest