Lost it

Farmall Super A, AV, 100, 130, & 140 1939 - 1973

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
JSTRICKLAND
5+ Years
5+ Years
Posts: 80
Joined: Wed Feb 13, 2013 4:38 pm
Zip Code: 28601

Lost it

Postby JSTRICKLAND » Sat Feb 20, 2016 9:33 pm

While working on the grandson 1948 Super A today I took out the plug screw on the manifold right above the carb. I thought what a great place to shoot starter fluid into. And I lost it, does anyone know what thread and size it is. And where to get a replacement?http://www.farmallcub.com/phpBB2/posting.php?mode=post&f=170#

James

User avatar
havoc1482
5+ Years
5+ Years
Posts: 987
Joined: Fri Sep 20, 2013 11:17 am
Zip Code: 01034
eBay ID: havoc1482
Tractors Owned: _______ 1948 Farmall Super A
Circle of Safety: Y
Twitter ID: @havoc1482
Location: Granville, MA

Re: Lost it

Postby havoc1482 » Sat Feb 20, 2016 9:45 pm

I believe its a standard pipe thread size. Whad I do is if i have any pipe fittings llying around to perform trial and error to see what fits and use that as a template
Mike
Image

I bleed Black & Gold

IH Collectors Club New England (Chapter 18)

Western Mass. (The 413)

staninlowerAL
5+ Years
5+ Years
Posts: 3518
Joined: Fri Oct 29, 2010 11:34 pm
Zip Code: 36558
Tractors Owned: Cubs: (3)'49's, (1)'52, (1)'57 IH Cub LoBoy w/FH, (1)'72 154 Number Series Loboy, '76 Longstripe w/FH, Mowers: C-22, Bush Hog 412, Pennington 59, Woods RM42CF, Woods 42, assorted FCub plows, planters, discs, etc. OTHERS: '49 AC B & Ind. Sickle mower, '61 AC D12 Ser 2, '52 8N, '56 Ferguson 35 Deluxe, '53 MM BG (offset), (2) '49 Avery V's, '51 JD M (regular), '56 JD 420C, with Blade and fire plow, '85 JD 850 (Yanmar) w/72" belly mower, '76 Yanmar 1500, Sears Surburban's, MTD's, Jeeps & other misc. "treasures"
Circle of Safety: Y
Location: AL (Southwest)

Re: Lost it

Postby staninlowerAL » Sat Feb 20, 2016 9:51 pm

My parts list does not show it as an identified separate part. You might try a regular pipe thread plug, I think a cub is 1/8 mipt. Stan
SA manifold.jpg

User avatar
ricky racer
10+ Years
10+ Years
Posts: 4337
Joined: Wed Sep 12, 2007 8:40 pm
Zip Code: 49120
Circle of Safety: Y
Location: Niles / Buchanan, Michigan

Re: Lost it

Postby ricky racer » Sat Feb 20, 2016 9:54 pm

1/8" NPT.
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub

JSTRICKLAND
5+ Years
5+ Years
Posts: 80
Joined: Wed Feb 13, 2013 4:38 pm
Zip Code: 28601

Re: Lost it

Postby JSTRICKLAND » Sat Feb 20, 2016 9:56 pm

Cancel the research unless you just want to know? My son walks in and I say I need your help. He says for what your tractors, and I say yes, but you will need a flashlight. So out we go to the shed, I made it there first and found it under the right rear tire. Amazing my wife and I looked for fifteen minutes earlier while still day light out and then I find it with a flashlight in a minute. Go figure!

Thanks
James

staninlowerAL
5+ Years
5+ Years
Posts: 3518
Joined: Fri Oct 29, 2010 11:34 pm
Zip Code: 36558
Tractors Owned: Cubs: (3)'49's, (1)'52, (1)'57 IH Cub LoBoy w/FH, (1)'72 154 Number Series Loboy, '76 Longstripe w/FH, Mowers: C-22, Bush Hog 412, Pennington 59, Woods RM42CF, Woods 42, assorted FCub plows, planters, discs, etc. OTHERS: '49 AC B & Ind. Sickle mower, '61 AC D12 Ser 2, '52 8N, '56 Ferguson 35 Deluxe, '53 MM BG (offset), (2) '49 Avery V's, '51 JD M (regular), '56 JD 420C, with Blade and fire plow, '85 JD 850 (Yanmar) w/72" belly mower, '76 Yanmar 1500, Sears Surburban's, MTD's, Jeeps & other misc. "treasures"
Circle of Safety: Y
Location: AL (Southwest)

Re: Lost it

Postby staninlowerAL » Sat Feb 20, 2016 11:17 pm

JSTRICKLAND wrote:.......I looked for fifteen minutes earlier while still day light out and then I find it with a flashlight in a minute. Go figure! Thanks James
Otherwise know as MURPHY'S LAW!!! :{_}: :-:-):


Return to “Farmall A, Super A, AV, 100, 130 & 140”

Who is online

Users browsing this forum: No registered users and 2 guests