This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Where to mount the Touch Control Gauge on a Super A

Farmall Super A, AV, 100, 130, & 140 1939 - 1973
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
AL Farmall Boy
10+ Years
10+ Years
Posts: 2555
Joined: Tue Aug 10, 2010 6:38 pm
Zip Code: 35630
Circle of Safety: Y

Re: Where to mount the Touch Control Gauge on a Super A

Postby AL Farmall Boy » Tue Jan 10, 2017 3:06 pm

Maybe not...here is a picture of it. It was on a Farmall 140 at the request of the owner. This one was on the side of the dash. I thought I had mounted one on the top where the old TC gauge went.
Attachments
phfhoto 3.JPG
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com

:tractor: Follow my page "Alabama Tractor Pickers" on YouTube & Facebook! :tractor:

SPONSOR AD

Sponsor



Sponsor
 

User avatar
AL Farmall Boy
10+ Years
10+ Years
Posts: 2555
Joined: Tue Aug 10, 2010 6:38 pm
Zip Code: 35630
Circle of Safety: Y

Re: Where to mount the Touch Control Gauge on a Super A

Postby AL Farmall Boy » Tue Jan 10, 2017 3:11 pm

oh...wait a minute.....here is the one I was thinking of....It was a Farmall 100 I had. I cleaned up the gauges that were already mounted by bailing wire, and used the original TC gauge mount brackets. Look at the TC quadrant and you can see where I mounted the engine temp gauge at the rearward spot.

So.....I guess It is a seperate bracket like I thought. Does that answer your question Al ?
Attachments
Picture 073.jpg
$T2eC16Z,!ysE9sy0i3R0BQclGLyCc!~~60_58.jpg
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com

:tractor: Follow my page "Alabama Tractor Pickers" on YouTube & Facebook! :tractor:

User avatar
Super A
10+ Years
10+ Years
Posts: 5228
Joined: Mon Jan 26, 2004 10:53 am
Zip Code: 28521
Tractors Owned: Collector of Super As, Corn Pickers, and a buncha other junk. Even a Cub now and then...
Circle of Safety: Y
Location: NC, Jacksonville area

Re: Where to mount the Touch Control Gauge on a Super A

Postby Super A » Tue Jan 10, 2017 3:42 pm

Yeah but I don't think the TC gauge has a separate bracket. Every one I have seen is all one piece.

Al
White Demo Super A Restoration Updates

Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022

User avatar
twotone
10+ Years
10+ Years
Posts: 1189
Joined: Sat May 14, 2011 6:09 pm
Zip Code: 15132
Tractors Owned: 53 F Cub
73 F Cub
53 Super A With Snow/Grader Blade
193 Plow With Colter And Jointer
144 Cultivators
22 Mower
Circle of Safety: Y
Location: Versailles,Pa.

Re: Where to mount the Touch Control Gauge on a Super A

Postby twotone » Tue Jan 10, 2017 9:00 pm

I also mounted an oil pressure guage next to the TC guage on my SA. Not a good picture if I can get it to post. I'll get a better one tomorrow.
Know Your Cub, And Your Cub Will Know You.

Tom

User avatar
havoc1482
10+ Years
10+ Years
Posts: 987
Joined: Fri Sep 20, 2013 11:17 am
Zip Code: 01085
eBay ID: havoc1482
Tractors Owned: _______ 1948 Farmall Super A
Circle of Safety: Y
Twitter ID: @havoc1482
Location: Westfield, MA
Contact:

Re: Where to mount the Touch Control Gauge on a Super A

Postby havoc1482 » Tue Jan 10, 2017 11:36 pm

I just ran a bolt through to the other side through the curl of the TC sensor bracket.
Mike
Image

I bleed Black & Gold

IH Collectors Club New England (Chapter 18)

Western Mass. (The 413)

User avatar
Super A
10+ Years
10+ Years
Posts: 5228
Joined: Mon Jan 26, 2004 10:53 am
Zip Code: 28521
Tractors Owned: Collector of Super As, Corn Pickers, and a buncha other junk. Even a Cub now and then...
Circle of Safety: Y
Location: NC, Jacksonville area

Re: Where to mount the Touch Control Gauge on a Super A

Postby Super A » Wed Jan 11, 2017 7:06 am

havoc1482 wrote:I just ran a bolt through to the other side through the curl of the TC sensor bracket.


Yeah that's what the parts book shows.
Al
White Demo Super A Restoration Updates

Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022

User avatar
J-man
5+ Years
5+ Years
Posts: 25
Joined: Fri Aug 21, 2015 5:28 am
Zip Code: 35080
Tractors Owned: International 154 X 2
Farmall Cub X 2
Farmall Super A X 3
Location: Helena, Alabama

Re: Where to mount the Touch Control Gauge on a Super A

Postby J-man » Fri Feb 24, 2017 1:57 pm

Guys,
Thanks for all the help. In the first picture it shows it mounted on the front end of the controls and the second picture shows it on rear, which one is correct

User avatar
twotone
10+ Years
10+ Years
Posts: 1189
Joined: Sat May 14, 2011 6:09 pm
Zip Code: 15132
Tractors Owned: 53 F Cub
73 F Cub
53 Super A With Snow/Grader Blade
193 Plow With Colter And Jointer
144 Cultivators
22 Mower
Circle of Safety: Y
Location: Versailles,Pa.

Re: Where to mount the Touch Control Gauge on a Super A

Postby twotone » Fri Feb 24, 2017 4:19 pm

Not a good close up, but here's mine.
Attachments
IMG_0498.JPG
Know Your Cub, And Your Cub Will Know You.

Tom

User avatar
J-man
5+ Years
5+ Years
Posts: 25
Joined: Fri Aug 21, 2015 5:28 am
Zip Code: 35080
Tractors Owned: International 154 X 2
Farmall Cub X 2
Farmall Super A X 3
Location: Helena, Alabama

Re: Where to mount the Touch Control Gauge on a Super A

Postby J-man » Fri Mar 03, 2017 9:52 am

Tom,

Perfect, thank you Sir for confirming this for me!


Return to “Farmall A, Super A, AV, 100, 130 & 140”

Who is online

Users browsing this forum: No registered users and 6 guests