[phpBB Debug] PHP Warning: in file [ROOT]/includes/functions.php on line 4493: ob_start(): output handler 'ob_gzhandler' conflicts with 'zlib output compression'
Farmall Cub • View topic - Questions about a 130 implements

Questions about a 130 implements

Mon May 01, 2006 8:38 am

Which tractor implements will interchange with a 130 so I will know what to go looking for. "much obliged"

Mon May 01, 2006 9:04 am

The 130 is the same size and power as a Farmall Super A, 100, or International 140. The Farmall B was also the same size/power, with just a different axle setup. Almost any of the attachments for those tractors will interchange.

Mon May 01, 2006 9:46 am

slingblade, I believe this information was covered in your "which should I buy" thread, but here you go again:

The 130 is basically the same tractor underneath as a Super A, 100, and 140. Any of the implements from any of these four tractors will fit, as far as front-mounted stuff like cultivators, blades, loaders, mower decks, etc..

On the back, it depends if you have a one-point Fast Hitch or not. If you have a Fast Hitch, you can use Fast Hitch implements, but not "regular" implements. The opposite is true if you do not have Fast Hitch.

Mon May 01, 2006 10:15 am

Sorry, my mind ain't as sharp as it used to be