Farmall 100, 1954 - 1973
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Fri May 05, 2006 10:01 am
After doing a search and not finding but about a dozen threads on the 130 I need to ask this question. What is the simplest way to install a 3 point on my 130. My neighbors Super A has a square rear rockshaft with the square tabs that have the holes in it welded to the shaft. Mines is round and has no attachement point for the top link. I was wondering if I had to weld tabs onto it or what.
Fri May 05, 2006 11:01 am
Sounds like you've got a pretty good idea of what needs to be done to me...
Are you fabbing one up yourself, or buying a kit?
Fri May 05, 2006 1:51 pm
Never seen or heard of a square rear rockshaft, but there are a lot of things I haven't seen. This is the way I have mine set up on my Super A. It is a home made top link out of a turn buckle because I can get the adjustment I want better than the store bought ones.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.