splines

Farmall 100, 1954 - 1973

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

splines

Postby t jackson » Wed Aug 16, 2006 9:18 pm

how many splines on a 130 pto
Last edited by t jackson on Thu Aug 17, 2006 8:21 pm, edited 1 time in total.
User avatar
t jackson
5+ Years
5+ Years
 
Posts: 885
Joined: Wed Feb 01, 2006 9:36 pm
Location: MD, Westminster
Zip Code: 21157
Circle of Safety Award
Circle of Safety: Y

Postby Bigdog » Wed Aug 16, 2006 9:32 pm

6.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

http://www.cubtug.com
User avatar
Bigdog
Team Cub
Team Cub
 
Posts: 23820
Joined: Sun Feb 02, 2003 12:50 pm
Location: OH, Stoutsville
Zip Code: 43154
Circle of Safety Award
Circle of Safety: Y

PTO diameter

Postby Ron Thomas » Wed Sep 27, 2006 10:49 am

When measuring the PTO diameter is it ID or OD?
Ron Thomas
5+ Years
5+ Years
 
Posts: 50
Joined: Tue Jun 21, 2005 11:28 pm
Location: Jackson County, KY

Postby Eugene » Wed Sep 27, 2006 12:24 pm

The standard for a PTO is 6 spline, 1 3/8 inch diameter.

Eugene
Eugene
Team Cub Mentor
Team Cub Mentor
 
Posts: 12613
Joined: Fri Jul 02, 2004 9:52 pm
Location: Mo. Linn
Zip Code: 65051
Circle of Safety Award
Circle of Safety: Y

Postby George Willer » Wed Sep 27, 2006 2:14 pm

Eugene wrote:The standard for a PTO is 6 spline, 1 3/8 inch diameter.

Eugene
Outside. :D
George Willer
http://gwill.net

The most affectionate creature in the world is a wet dog. Ambrose Bierce
User avatar
George Willer
Cub Pro
Cub Pro
 
Posts: 7011
Joined: Sun Feb 02, 2003 9:36 pm
Location: OHIO, Fremont
Zip Code: 43420
Circle of Safety Award
Circle of Safety: Y

Postby Eugene » Wed Sep 27, 2006 7:44 pm

George Willer wrote:
Eugene wrote:The standard for a PTO is 6 spline, 1 3/8 inch diameter.

Eugene
Outside. :D


Nope. It's inside diameter when you measure the tractor yoke. :wink:

Eugene
Eugene
Team Cub Mentor
Team Cub Mentor
 
Posts: 12613
Joined: Fri Jul 02, 2004 9:52 pm
Location: Mo. Linn
Zip Code: 65051
Circle of Safety Award
Circle of Safety: Y

Postby George Willer » Wed Sep 27, 2006 7:50 pm

Eugene wrote:
George Willer wrote:
Eugene wrote:The standard for a PTO is 6 spline, 1 3/8 inch diameter.

Eugene
Outside. :D


Nope. It's inside diameter when you measure the tractor yoke. :wink:

Eugene


I meant the shaft! 1 3/8" is the major diameter.

When measuring the yoke the O.D. must be a larger number than the I.D. Otherwise the hole would be on the outside! :D
George Willer
http://gwill.net

The most affectionate creature in the world is a wet dog. Ambrose Bierce
User avatar
George Willer
Cub Pro
Cub Pro
 
Posts: 7011
Joined: Sun Feb 02, 2003 9:36 pm
Location: OHIO, Fremont
Zip Code: 43420
Circle of Safety Award
Circle of Safety: Y

Postby Eugene » Wed Sep 27, 2006 8:17 pm

George Willer wrote:
Eugene wrote:
George Willer wrote:
Eugene wrote:The standard for a PTO is 6 spline, 1 3/8 inch diameter.

Eugene
Outside. :D


Nope. It's inside diameter when you measure the tractor yoke. :wink:
Eugene


I meant the shaft! 1 3/8" is the major diameter. When measuring the yoke the O.D. must be a larger number than the I.D. Otherwise the hole would be on the outside! :D


George: Are you giving me the shaft? :P
Eugene
Eugene
Team Cub Mentor
Team Cub Mentor
 
Posts: 12613
Joined: Fri Jul 02, 2004 9:52 pm
Location: Mo. Linn
Zip Code: 65051
Circle of Safety Award
Circle of Safety: Y


Return to Farmall 100 Series, 100, 130, 140

Who is online

Users browsing this forum: No registered users and 1 guest