Switch to full style
Farmall 100, 1954 - 1973

Forum rules

Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post a reply

splines

Wed Aug 16, 2006 9:18 pm

how many splines on a 130 pto
Last edited by t jackson on Thu Aug 17, 2006 8:21 pm, edited 1 time in total.

Wed Aug 16, 2006 9:32 pm

6.

PTO diameter

Wed Sep 27, 2006 10:49 am

When measuring the PTO diameter is it ID or OD?

Wed Sep 27, 2006 12:24 pm

The standard for a PTO is 6 spline, 1 3/8 inch diameter.

Eugene

Wed Sep 27, 2006 2:14 pm

Eugene wrote:The standard for a PTO is 6 spline, 1 3/8 inch diameter.

Eugene
Outside. :D

Wed Sep 27, 2006 7:44 pm

George Willer wrote:
Eugene wrote:The standard for a PTO is 6 spline, 1 3/8 inch diameter.

Eugene
Outside. :D


Nope. It's inside diameter when you measure the tractor yoke. :wink:

Eugene

Wed Sep 27, 2006 7:50 pm

Eugene wrote:
George Willer wrote:
Eugene wrote:The standard for a PTO is 6 spline, 1 3/8 inch diameter.

Eugene
Outside. :D


Nope. It's inside diameter when you measure the tractor yoke. :wink:

Eugene


I meant the shaft! 1 3/8" is the major diameter.

When measuring the yoke the O.D. must be a larger number than the I.D. Otherwise the hole would be on the outside! :D

Wed Sep 27, 2006 8:17 pm

George Willer wrote:
Eugene wrote:
George Willer wrote:
Eugene wrote:The standard for a PTO is 6 spline, 1 3/8 inch diameter.

Eugene
Outside. :D


Nope. It's inside diameter when you measure the tractor yoke. :wink:
Eugene


I meant the shaft! 1 3/8" is the major diameter. When measuring the yoke the O.D. must be a larger number than the I.D. Otherwise the hole would be on the outside! :D


George: Are you giving me the shaft? :P
Eugene
Post a reply