100 stalls

Farmall 100, 1954 - 1973

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

100 stalls

Postby virginia100 » Fri Nov 10, 2006 12:43 pm

Need some help, every once in a while my 100 will sputter and stall. I start it back up and it seems to run fine. I thought it was the carb and still think it is. I sprayed some carb cleaner in it and it still does it. Today I changed the coil; everything else is new, points, plugs and wires. I do not think it is electrical but I had a new coil so I decided to try it. What is the most likely cause of this?

Thanks!!
'56 Farmall 100 with Woods L306A 72" belly mower and single bottom plow; JD 322 w/50" deck, 49" snowblower and 54" blade, couple of old Simplicity's
User avatar
virginia100
5+ Years
5+ Years
 
Posts: 12
Joined: Tue Oct 17, 2006 7:28 am
Location: Fredericksburg, VA

Postby John *.?-!.* cub owner » Fri Nov 10, 2006 1:52 pm

if you remove the plug in the bottom of the carb when it stalls does gas run out good? if not check for dirt in fuel line, or aobve flrat vavle. may even be rust in gas tank the gets over inlet. another thing is to lossen teh gas cap and see if it still stalls.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
 
Posts: 19474
Joined: Sun Feb 02, 2003 2:09 pm
Location: Mo, Potosi
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.

Postby virginia100 » Sat Nov 11, 2006 6:24 pm

Thanks for the help; it hasn't stalled since I posted this. It has to be something in the fuel line or tank. The tractor sat for about 5 years until about 3 weeks ago. One thing I did before starting it up for the first time in 5 years was drain the gas tank. I should have taken it off and cleaned it out but I was anxious to get it running.
'56 Farmall 100 with Woods L306A 72" belly mower and single bottom plow; JD 322 w/50" deck, 49" snowblower and 54" blade, couple of old Simplicity's
User avatar
virginia100
5+ Years
5+ Years
 
Posts: 12
Joined: Tue Oct 17, 2006 7:28 am
Location: Fredericksburg, VA

Postby Daniel H. » Sun Nov 12, 2006 8:25 am

There is an inlet screen in the elbw that feeds fuel into the carb. It will plug up with rust and cause it t stall.
The four most expensive words in tractor restoration: "We might as well..."
Daniel H.
10+ Years
10+ Years
 
Posts: 552
Joined: Mon Feb 03, 2003 1:18 pm
Location: NC, Yadkinville

Postby BigBill » Sun Nov 19, 2006 11:36 am

Yup i been there not too long ago I blew air into the hose on the carb after cleaning the screen. I guess the passage way from the tank to the bowel was plugged it hasn't stalled since.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
BigBill
5+ Years
5+ Years
 
Posts: 5705
Joined: Sat Jul 22, 2006 5:02 pm
Location: in northern usa
Zip Code: 00000

Postby Jim Becker » Sun Nov 19, 2006 11:48 am

BigBill wrote:I guess the passage way from the tank to the bowel was plugged

A guy at work had that problem and it required surgery. :(
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11933
Joined: Sun Feb 02, 2003 3:14 pm
Location: MN
Zip Code: 55319
Circle of Safety Award
Circle of Safety: Y

Postby George Willer » Sun Nov 19, 2006 2:55 pm

BigBill wrote:Yup i been there not too long ago I blew air into the hose on the carb after cleaning the screen. I guess the passage way from the tank to the bowel was plugged it hasn't stalled since.


I hope you had the carb apart when you applied the air. If not you may have a collapsed float.

BTW, for safety reasons we recommend NOT using hose for a fuel line. That's an excellent way to allow a small fire to become a BIG one. :( :( :(

http://www.farmallcub.com/phpBB2/viewtopic.php?t=12917
George Willer
http://gwill.net

The most affectionate creature in the world is a wet dog. Ambrose Bierce
User avatar
George Willer
Cub Pro
Cub Pro
 
Posts: 7011
Joined: Sun Feb 02, 2003 9:36 pm
Location: OHIO, Fremont
Zip Code: 43420
Circle of Safety Award
Circle of Safety: Y

Update

Postby virginia100 » Mon Nov 20, 2006 2:20 pm

A few days ago after it starting running rough again I cleaned out the screen at the carb. It needed to be cleaned out. I thought it did the trick but yesterday I took it out again and it stalled. Any other ideas?

Thanks for the help!!!!
'56 Farmall 100 with Woods L306A 72" belly mower and single bottom plow; JD 322 w/50" deck, 49" snowblower and 54" blade, couple of old Simplicity's
User avatar
virginia100
5+ Years
5+ Years
 
Posts: 12
Joined: Tue Oct 17, 2006 7:28 am
Location: Fredericksburg, VA

Postby 400lbsonacubseatspring » Mon Nov 20, 2006 5:08 pm

Is the glass sediment bowl still intact under your fuel tank??

What does it look like?? Do you have to clean it out frequently??

What does the inside of your gas tank look like??
400lbsonacubseatspring
5+ Years
5+ Years
 

Postby virginia100 » Mon Nov 20, 2006 5:59 pm

I cleaned out the sediment bowl out when I cleaned the screen. It needed cleaning out also but I don't know when it was cleaned out last.
'56 Farmall 100 with Woods L306A 72" belly mower and single bottom plow; JD 322 w/50" deck, 49" snowblower and 54" blade, couple of old Simplicity's
User avatar
virginia100
5+ Years
5+ Years
 
Posts: 12
Joined: Tue Oct 17, 2006 7:28 am
Location: Fredericksburg, VA

Postby virginia100 » Mon Nov 20, 2006 6:04 pm

I have only had the tractor about a month and it had sat for about 5 years before I got it. Not sure how often the sediment bowl has to be cleaned. Before starting it for the first time I drained the tank and put in fresh gas. I could not see anything in the bottom of the tank but I was in a hurry to get it running. I should have taken the tank off and cleaned it out.
'56 Farmall 100 with Woods L306A 72" belly mower and single bottom plow; JD 322 w/50" deck, 49" snowblower and 54" blade, couple of old Simplicity's
User avatar
virginia100
5+ Years
5+ Years
 
Posts: 12
Joined: Tue Oct 17, 2006 7:28 am
Location: Fredericksburg, VA

Postby 400lbsonacubseatspring » Mon Nov 20, 2006 6:09 pm

The sediment bowls are made out of glass so you can judge when they need to be cleaned...if they look crummy....they need cleaning...... it's not something to be put on a time schedule....

It might be best to get that tank cleaned out, after all........

Just my opinion.....
400lbsonacubseatspring
5+ Years
5+ Years
 

Postby cowboy » Thu Nov 23, 2006 8:48 am

How is the vent in the gas cap :?: It may be pluged up causing a vacume in the gas tank :?: Also wich gas cap do you have. The original one :?: The latter style safty cap is taller and is still avabile free.

Good luck Billy
Take care of your equipment and it will take care of you. 1964 cub. Farmall 100 and 130.

"Those that say it can’t be done should not interrupt the ones who are doing it.”
User avatar
cowboy
Cub Pro
Cub Pro
 
Posts: 3414
Joined: Sat May 15, 2004 11:10 am
Location: MI, Britton
Zip Code: 49229

Postby parts man » Thu Nov 23, 2006 7:32 pm

It may also have a piece of debris floating in the tank that plugs off the tank outlet periodicly. If nothing else works try taking the tank off and thoroughly rinsing it out.
V.P. of T.S.A. (taking stuff apart)
User avatar
parts man
10+ Years
10+ Years
 
Posts: 619
Joined: Wed Jul 30, 2003 9:41 pm
Location: Sussex N.B. Can.

Postby BigBill » Sun Nov 26, 2006 11:42 am

I blew air into the fuel line to the tank as it was off the carb at the time and it was just human pressure my 154 was stuck on the front lawn when it finally stalled and it wouldn't restart. I finally cleared the stoppage and its been fine ever since. When your stuck we get desperate. It was my second trip mowing the grass with my new cub.

I removed the bowel and checked the screen above it, i opened the gas valve(shutoff) and still had no gas out of it. I reassembled the bowel/screen and i blew into the hose and i had plenty of gas flow right after. Its been all little simple problems with my cub, I guess its from sitting. The only other problem i had was the clutch adjustment.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
BigBill
5+ Years
5+ Years
 
Posts: 5705
Joined: Sat Jul 22, 2006 5:02 pm
Location: in northern usa
Zip Code: 00000

Next

Return to Farmall 100 Series, 100, 130, 140

Who is online

Users browsing this forum: No registered users and 1 guest