Farmall Cub

Posted: **Mon Nov 27, 2006 6:28 pm**

Followed instructions with compression tester and got the following readings on the F130 with C123 engine.
1=125 PSI
2=125 PSI
3=125 PSI
4=125 PSI

Good readings for this engine?

The manual states compression as 6.5:1 ratio, but that's greek to me :shock:

Also got some wierd squeaking noise while checking #4, maybe a stuck intake valve?

Posted: **Mon Nov 27, 2006 6:43 pm**

I knew GW had went over this with me before. Way back in '03.

http://www.ytmag.com/cgi-bin/viewit.cgi?bd=farmall&th=357040

I should be happy with 125 PSI on the 130.

Posted: **Mon Nov 27, 2006 6:45 pm**

Those are good readings. Especially if they are dry readings.

Posted: **Mon Nov 27, 2006 10:16 pm**

EZ wrote:Also got some wierd squeaking noise while checking #4, maybe a stuck intake valve?

Can't be too stuck with that compression.

Farmall Cub

F130 Compression Readings

F130 Compression Readings

Re: F130 Compression Readings