Farmall 140 2 bottom plow

I have Dad's Farmall 140 now and most of the implements, but I don't know where to buy parts. I want to refurbish the 2 bottom plow this winter. Can you guys tell me where to find plow points and shears? P.S. I enjoy reading all the posts and get a lot of joy going down memory lane remembering my farmboy days.

Hatchet - welcome to the forum! If you don't have an IH dealer close by try Carter & Gruenewald at http://www.cngco.com or check out a local TSC store or other ag supply store.

As well as Jp Tractor Supply at the bottom of the page.

And you might try your local farm and ranch supply store. Also Valu-bilt.com. Get on the Valu-bilt.com web site and ask for their free catalog. It's a very hand reference. If the plow is IH you can also try New Holland.

Is your plow a "spear point" with multi-piece moldboard or the "throw-away type"? ----another type would be the 1-piece share, and the moldboard. the spears are not made anymore and very few are to be found!-- I re-worked some for my plows many years ago, because I couldn't get new ones! thanks; sonny

Thanks for all the info and web sites , and yes the plow point does look like a spear with a slot in back for a bolt. I plan on plowing about a 50 x 75 plot and using the one row corn planter to see if I can grow a corn crop.

You have "Plow Chief" bottoms, if you have the little point on the front of the share. I would call Ken at Carter and Gruenewald (1-866-FARMALL) as mentioned before.