Switch to full style
Farmall 100, 1954 - 1973

Forum rules

Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post a reply

140 Alternator installation pics added

Sun Mar 02, 2008 9:37 pm

I got tired of the 6 volt system on my 140 [ as it is a working tractor and not a trailer queen ] I took a generator bracket off of a super A and mounted it in place of the generator bracket on the 140. Then took a piece of flat steel and made a bracket to fit the alternator. I welded this to the bracket off the super A. It made for a nice bracket for the alternator.
I will take some pics and add tomorrow.
works nice out of the way

Mon Mar 03, 2008 10:07 pm

I will get pictures of my conversion it is almost the same as yours but a different bottom bracket

Tue Mar 04, 2008 5:26 pm

Here is a pic I will get a closer shot tom.


Tue Mar 04, 2008 6:59 pm

What kind on air compressor is that?

Tue Mar 04, 2008 7:25 pm

spaceghost wrote:Dave
What kind on air compressor is that?

Its a farm Hand from TSC it is a 3 cylinder I like it

Wed Mar 05, 2008 1:26 am

That alternator looks familiar

Wed Mar 05, 2008 6:01 am

deputy jailer wrote:That alternator looks familiar

It should :D

Thu Mar 06, 2008 10:12 pm


Sat Mar 08, 2008 4:55 pm

This is how I mounted alternators on my 140's. I used 3 wire set up vs a 1 wire so it charges at lower rpm's.



Sat Mar 08, 2008 5:09 pm

Try again;


Sat Mar 08, 2008 5:11 pm


Sat Mar 08, 2008 5:13 pm


Sat Mar 08, 2008 7:13 pm

I got your pictures working again,


Last edited by spaceghost on Mon Mar 10, 2008 5:43 pm, edited 4 times in total.

Sun Mar 09, 2008 4:55 pm

here is the bracket I made for the 100




Mon Mar 10, 2008 5:42 pm

NawlensGator photes are working now.
Post a reply