Switch to full style
Farmall 100, 1954 - 1973

Forum rules

Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post a reply

Now I see what you mean

Tue Jun 10, 2008 6:41 pm

The phrase , as long as we're into it we might as well... came to mind. I last posted on June 2 and asked about where to find the drain plug on my Farmall 140. I did, and thanks for the advice. Now after $ 400.00 , I'm still not running , but I am close. :{_}:

Re: Now I see what you mean

Tue Jun 10, 2008 8:41 pm

i feel your pain.........

Re: Now I see what you mean

Tue Jun 10, 2008 10:48 pm

I just got done doing the same thing on a tractor I had sold. It was going to an older gentlemen and I wanted to be sure it would last him a while.

Re: Now I see what you mean

Wed Jun 11, 2008 7:32 am

I keep telling people, "DON'T TAKE THE HOOD OFF."

Image

Sorry for the quality of the picture, and the guy in it. :(

Re: Now I see what you mean

Thu Jun 12, 2008 1:03 am

John,

You look pretty cool to me--'specially with those shades 8) :)

Re: Now I see what you mean

Thu Jun 12, 2008 9:17 pm

Well, the new radiator has been installed, new coolant and new thermostat. I think were going to be okay. I was just wondering , the old thermostat was 170 degree but all NAPA had was 160 or 180. I chose 180 . What do you guys think? :?:

Re: Now I see what you mean

Fri Jun 13, 2008 8:48 am

Are you doing mostly hot weather or cold weather operations? If you run in hot weather and really work the tractor you would probably want a 160. If you operate mostly in cold weather you would want the 180. If you're not working the tractor hard, it probably won't make any difference at all.

Re: Now I see what you mean

Fri Jun 13, 2008 8:42 pm

Thanks Big Dog, You' re the best. I just piddle around anymore, so it sounds like the 180 degree will be ok.
Post a reply