1960 140 gov problem

Farmall 100, 1954 - 1973

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

1960 140 gov problem

Postby billy clay » Mon Apr 05, 2010 7:18 pm

when you move the throtle lever it does not change the engine speed you have to manually move the carb linkage. when you look in oil cap on gov. you can see the weight move hooked to the shaft tha truns across to the carb but the weight hooked to the throttle lever does not move at all any ideas or diagrams would be helpful
1973 cub
1957 cub fasthitch
1967 cub fasthitch
1970 cub fasthitch
woods rm42
194 plow
fasthich disc
twindraulic loader
woods 42 rear fasthitch mower
CULTIVATORS
billy clay
501 Club
501 Club
 
Posts: 1085
Joined: Thu Jun 12, 2008 8:24 pm
Location: souther md
Zip Code: 20657
Tractors Owned: 1962 farmall 460 d
1978 cub fasthitch
1957 cub fasthitch
1970 cub fasthitch
1954 john deere 40
1967 cub fasthitch
1954 john deere 60
1973 cub

Re: 1960 140 gov problem

Postby Jim Becker » Mon Apr 05, 2010 10:43 pm

Sounds like a broken governor spring. It is inside the governor housing. Look in the parts catalog for an exploded diagram.
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11850
Joined: Sun Feb 02, 2003 3:14 pm
Location: TX/MN
Zip Code: 75048
Circle of Safety Award
Circle of Safety: Y


Return to Farmall 100 Series, 100, 130, 140

Who is online

Users browsing this forum: No registered users and 2 guests