130 Transmission Problem...

[BohemianJon]

I might have goofed up...I filled up the transmission and now get a white/tan colored foam coming up around the shifter arm when working the tractor. What's my problem and what do I need to do to correct. As usual, many thanks.

[Gary Dotson]

Sounds like you have overfilled it. Also, since the foam is tan in color, it sounds like you have moisture in there. It will to be flushed.

[BohemianJon]

Thanks Gary...and what is proper procedure to flush it out? Where do I drain it from? How much is in there? What do I use to flush it out? How much do I put in? Thanks.

[Bob McCarty]

I can't answer your questions, but just checked and Binder Books has the manuals for the 130 in case you want them.

Bob

[Don McCombs]

You can also look at the Super A Owner's Manual on Rudi's manual server at the top of this page. I'm pretty sure they both use the same transmission.

[artc]

the drain is at the rear of the transmission on the right side. a pipe plug that accepts a 1/2" breaker bar. there will be a level plug about 1 1/2" off the bottom of the trans. i think its on the left front.

[BohemianJon]

Thanks Guys...appreciate your help and guidance.