Page 1 of 1

130 Transmission Problem...

Posted: Tue Mar 08, 2011 7:40 am
by BohemianJon
I might have goofed up...I filled up the transmission and now get a white/tan colored foam coming up around the shifter arm when working the tractor. What's my problem and what do I need to do to correct. As usual, many thanks.

Re: 130 Transmission Problem...

Posted: Tue Mar 08, 2011 8:39 am
by Gary Dotson
Sounds like you have overfilled it. Also, since the foam is tan in color, it sounds like you have moisture in there. It will to be flushed.

Re: 130 Transmission Problem...

Posted: Tue Mar 08, 2011 12:11 pm
by BohemianJon
Thanks Gary...and what is proper procedure to flush it out? Where do I drain it from? How much is in there? What do I use to flush it out? How much do I put in? Thanks.

Re: 130 Transmission Problem...

Posted: Tue Mar 08, 2011 12:14 pm
by Bob McCarty
I can't answer your questions, but just checked and Binder Books has the manuals for the 130 in case you want them.

Bob

Re: 130 Transmission Problem...

Posted: Tue Mar 08, 2011 12:33 pm
by Don McCombs
You can also look at the Super A Owner's Manual on Rudi's manual server at the top of this page. I'm pretty sure they both use the same transmission.

Re: 130 Transmission Problem...

Posted: Tue Mar 08, 2011 1:00 pm
by artc
the drain is at the rear of the transmission on the right side. a pipe plug that accepts a 1/2" breaker bar. there will be a level plug about 1 1/2" off the bottom of the trans. i think its on the left front.

Re: 130 Transmission Problem...

Posted: Wed Mar 09, 2011 8:05 am
by BohemianJon
Thanks Guys...appreciate your help and guidance.