Farmall 100, 1954 - 1973
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Fri Jan 27, 2012 9:23 am
i want to make my 67 140 as correct as possible. i want to put rear lights on it. i have a bracket for one light but no light.what type of light goes on the rear, and do they have two light or just one , thanks
Fri Jan 27, 2012 12:14 pm
One light on the rear, I THINK early models like yours were "post"mounted, on the left side behind the seat. I believe later models are "flatback" that mount directly against a sheetmetal bracket on the left fender.
Fri Jan 27, 2012 12:56 pm
i have a mount on the left side.is that a hookup light similiar to the headlights or is a two way light. in other words with a lens on both sides?
Fri Jan 27, 2012 1:05 pm
donut wrote:i have a mount on the left side.is that a hookup light similiar to the headlights or is a two way light. in other words with a lens on both sides?
I am thinking
the rear light will look like a headlight, but would have a red light in it too. It should be the tail light and red tail light built into one bulb.
Fri Jan 27, 2012 1:54 pm
thanks i' see if i can find one .
Fri Jan 27, 2012 1:58 pm
If I am right, the actual bulb is easy. The light shell shouldn't be too hard from some of our board vendors/sponsors.\
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.