Page 3 of 4

Re: 130 Touch Control

Posted: Wed Feb 08, 2012 2:27 pm
by EZ
Tom,

One adult beverage and call you in the morning.

Got it.

Re: 130 Touch Control

Posted: Sat Feb 11, 2012 9:51 am
by EZ
I am wondering why the rubber boots are the same for both the piston (which is way bigger) and the control rods.
Has anyone ordered and installed these new yet?
They are not cheap. Could get a nice pair of fishing boots for that price.

4ea.............364832R2..................BOOT.................17.63ea..........70.52 Total.

Re: 130 Touch Control

Posted: Sat Feb 11, 2012 11:37 am
by twotone
I paid 40.00 for 1 leather boot at CIH. I wonder If TM parts boots would work. Much cheaper.


Tom

Re: 130 Touch Control

Posted: Sat Feb 11, 2012 4:09 pm
by EZ
Tom,
As far as I could tell the leather is no longer available.
The part number for the rubber is the same for both piston and control locations.

Re: 130 Touch Control

Posted: Sat Feb 11, 2012 4:23 pm
by twotone
If you're talking about TM parts, I don't know. I'm lucky to have a parts guy that knows cubs well and he'll take the time to find stuff. I just bought a leather boot for an actuator 2 months ago. When he can't find another dealer with the part I need, he can always get it at Indianapolis.


Tom

Re: 130 Touch Control

Posted: Sat Feb 11, 2012 4:41 pm
by EZ
Tom,
No, this is from CIH Online Parts Store.

That is where I get my all my info. I check the part# in my original manual and match up with what CIH has in it's file.
Usually alot of parts are superceded by a new CIH number but the parts always match.

After I have all my info, I forward the order to my dealer in Southern Ontario.
No problems so far.

But this boot thing has me wondering what's up.

Thanks for the reply.

Re: 130 Touch Control

Posted: Sat Feb 11, 2012 4:42 pm
by twotone
I just checked TM parts. Check under "hydraulics" and you'll be suprised.


Tom

Re: 130 Touch Control

Posted: Sat Feb 11, 2012 4:56 pm
by EZ
Wow,

That is a nice price for leather c/w wire to boot. Pun intended.
The rubber is competitive price that would be much more cost to me in Cdn dollars.

Of course these are for the Cub T.C. Not sure how much difference compared to the 130.

Re: 130 Touch Control

Posted: Sat Feb 11, 2012 5:33 pm
by twotone
I wondered the size difference too, but I have a Super A and Cub parked right next to each other and I can't tell. They look the same to me. Someone here has to know if there is a difference. I think at that price I'd make them fit. I would also get leather. I think it lasts longer.


Tom

Re: 130 Touch Control

Posted: Sat Feb 11, 2012 5:50 pm
by EZ
Tom,

I just checked again.
Looks like my error.
The original manual TC-52A shows the same part #364832R1for both #47(Control) and #51(Piston).

I assumed that old manual to be correct.

However, when I look at the CIH Online Parts store, the Boot for the Piston comes up as #351754R3.

Control Valve Boot weight = 0.044lbs.
Piston Boot weight = 0.066lbs.

So there is a difference. Amen.

Had to email my dealer and get him to adjust the order accordingly.

Here's a link.
http://partstore.caseih.com/us/parts-search.html#epc::mr02-3882ar02-3882-651-25383

It says these boots will work in place of leather but no leather is offered as available.

Re: 130 Touch Control

Posted: Sat Feb 11, 2012 9:12 pm
by TWheat
I was lucky that ,while mine weren't useable, there was enough for a pattern for my local shoe maker to make them(took a little explaining what they were for). I had the leather and he charged me about 5 bucks apiece.

Re: 130 Touch Control

Posted: Sat Feb 11, 2012 10:12 pm
by EZ
TW,

That is the best.

Re: 130 Touch Control

Posted: Thu Feb 16, 2012 3:04 pm
by EZ
Aaarrrrrrrggggggggggggggg!!!!!

BOOT, Piston
# 351754r3. @ $ 54.26 each !

That is before tax!

Can anyone say, .......McIver.
Perhaps a bicycle inner tube would do just as good a job.
That money would pay for a lot of paint, or other needed parts.

Re: 130 Touch Control

Posted: Fri Feb 24, 2012 11:50 am
by EZ
My parts came in yesterday.
Hopefully I will have time on the weekend to clean and put that TC back together.
Standby for more pics.

Also have parts to freshen up the seals gaskets etc.. for the pump.

Gotta love it!!

Re: 130 Touch Control

Posted: Fri Mar 09, 2012 10:05 pm
by EZ
Here are some pics of my progress on the 130 TC unit.
All new O-rings installed. New gaskets, boots etc.
Only thing itching me is the fact that the Thermal Relief Valves did not have screens. Suppose maybe this model did not require screens.
Doubt anyone was in there before me, but who knows?
Image
Nice and clean, ready to go.
Image
All allen plugs removed. Thermal relief valves out as well.
Image
Parts packages on my reclaimed 'clean' work desk.
Image
About half way finished.
Image
All done. You can see the leftover O-rings on the package. The old O-rings are on the left. Some of the O-rings were wore out for sure.
Image
This new head gasket looks like a goalie mask from a horror movie.

So far so good.