Page 1 of 1
12 volt sealed beam for 100
Posted: Thu Jun 14, 2012 8:18 pm
by tmays
Anyone know if there is a 12V sealed beam headlight that will work in the original housing on a 100? The flat back housing Thanks
Re: 12 volt sealed beam for 100
Posted: Fri Jun 15, 2012 6:05 am
by DanR
When I did the Super A I did a Google on GE. They have the specs on every lamp they make.
Re: 12 volt sealed beam for 100
Posted: Sat Jun 16, 2012 10:53 pm
by sgtbull
you can modify a conventional 12v sealed beam bulb to work.. you have to grind the index bumps and run a ground wire, but it will work fine and only the learned will know the difference.
Re: 12 volt sealed beam for 100
Posted: Tue Jun 26, 2012 12:42 pm
by Matt Kirsch
Check my How-To on this in the How-To section.
Even the standard sealed beams are getting EXPENSIVE. Tractor Supply just doubled their prices here in the last 6 months, and went from Wagners to some cheap brand.
If you have a harbor freight tool store in the area you can get these CHEAP:
http://www.harborfreight.com/12-volt-ha ... 93904.htmlHarvest the bulb. It's the same dimensions as a standard 4511 sealed beam, and the indexing tabs are steel so they are easier to cut off.